Section 62-296.512 - Cutback Asphalt(1) Applicability. The emission limiting control standards set forth in subsection 62-296.512(2), F.A.C., shall apply to the manufacture and use of cutback asphalts for paving or maintaining roads, streets, highways, and parking lots.(2) Control Standards. No person shall cause, allow, or permit the manufacture, mixing, storage, use, or application of cutback asphalts except where:(a) Long-life storage of liquid asphalt is necessary, or(b) Stockpile storage of cold mixed asphaltic concrete patching material is necessary, or(c) The use or application at ambient temperature less than 50 degrees Fahrenheit (10 degrees Celsius) as determined by the nearest National Weather Service Station is necessary, or(d) The cutback asphalt is to be used solely as a penetrating prime coat, or(e) The cutback asphalt is to be used in a sand seal coat, or(f) The cutback asphalt is to be used as a tack coat in the routine maintenance of public roads, or the minor betterment of public roads.Fla. Admin. Code Ann. R. 62-296.512
Rulemaking Authority 403.061 FS. Law Implemented 403.021, 403.031, 403.061, 403.087 FS.
Formerly 17-2.650(1)(f) 13., 17-296.512, Amended 11-23-94, 1-1-96, Amended by Florida Register Volume 40, Number 122, June 24, 2014 effective 7/10/2014, Amended by Florida Register Volume 45, Number 147, July 30, 2019 effective 8/14/2019.Formerly 17-2.650(1)(f)13., 17-296.512, Amended 11-23-94, 1-1-96, 7-10-14, 8-14-19.