Every manufacturer of an electronic product to which a standard under this chapter is applicable shall set forth the information specified in § 10846.2 and § 10846.3. This information shall be provided in the form of a tag or label permanently affixed or inscribed on such products so as to be legible and readily accessible to view when the product is fully assembled for use or in such other manner as may be prescribed in the applicable standard. Except for foreign equivalent abbreviations all such labels or tags shall be in English.
The full name and address of the manufacturer of the product; abbreviations such as "Co.," "Inc.," or their foreign equivalents and the first and middle initials of individuals may be used. Where products are sold under a name other than that of the manufacturer of the product, the full name and address of the individual or company under whose name the product was sold may be set forth, provided such individual or company has previously supplied the Department with sufficient information to identify the manufacturer of the product.
The place of manufacture may be expressed in code provided the manufacturer has previously supplied the Department with the key to such code.
The month and year of manufacture shall be provided clearly and legibly, without abbreviation, and with the year shown as a four (4) digit number as follows:
Manufactured: (Insert Month and Year of Manufacture.)
Every manufacturer of an electronic product to which a standard under this chapter is applicable shall provide to the Department a list identifying each brand name which is applied to the product together with the full name and address of the individual or company for whom each product so branded is manufactured.
D.C. Mun. Regs. tit. 22, r. 22-B10846