D.C. Mun. Regs. tit. 22, r. 22-B10306

Current through Register Vol. 71, No. 49, December 6, 2024

Rule 22-B10306 - PRINCIPAL DISPLAY PANEL

10306.1

The term "principal display panel" as it applies to over-the-counter devices in package form and as used in this part means the part of a label that is most likely to be displayed, presented, shown, or examined under customary conditions of display for retail sale.

10306.2

The principal display panel shall be large enough to accommodate all of the mandatory label information required to be placed thereon by this part with clarity and conspicuousness and without obscuring designs, vignettes, or crowding.

10306.3

Where packages bear alternate principal display panels, information required to be placed on the principal display panel shall be duplicated on each principal display panel. For the purpose of obtaining uniform type size in declaring the quantity of contents for all packages of substantially the same size, the term "area of the principal display panel" means the area of the side or surface that bears the principal display panel, which area shall be:

(a) In the case of a rectangular package where one (1) entire side properly can be considered to be the principal display panel side, the product of the height times the width of that side;

(b) In the case of a cylindrical or nearly cylindrical container, forty percent (40%) of the product of the height of the container times the circumference; and

(c) In the case of any other shape of container, forty percent (40%) of the total surface of the container; provided however, that where the container presents an obvious "principal display panel" such as the top of a triangular or circular package, the area shall consist of the entire top surface.

10306.4

In determining the area of the principal display panel, exclude tops, bottoms, flanges at the tops and bottoms of cans, and shoulders and necks of bottles or jars. In the case of cylindrical or nearly cylindrical containers, information required by this part to appear on the principal display panel shall appear within that forty percent (40%) of the circumference which is most likely to be displayed, presented, shown, or examined under customary conditions of display for retail sale.

D.C. Mun. Regs. tit. 22, r. 22-B10306

Final Rulemaking published at 60 DCR 10252 (July 12, 2013)

Authority: Section 19(a)(3) of the District of Columbia Pharmacist and Pharmacy Regulation Act of 1980, effective September 16, 1980 (D.C. Law 3-98; D.C. Official Code § 47-2885.18(a)(3) (2005 Repl.)); Mayor's Order 98-48, dated April 15, 1998; Section 4902 of the Fiscal Year 2002 Budget Support Act of 2001, effective October 3, 2001 (D.C. Law 14-28; D.C. Official Code § 7-731 (2008 Repl.)); Section 15 of the District of Columbia Medical Device Manufacture and Distribution Licensure Act of 1990, effective June 13, 1990 (D.C. Law 8-137; D.C. Official Code § 48-714(a) (2005 Repl.)); and Mayor's Order 98-88, dated May 29, 1998.