D.C. Mun. Regs. tit. 20, r. 20-3203

Current through Register Vol. 71, No. 43, October 25, 2024

Rule 20-3203 - SCOPE OF MOLD LICENSES

3203.1

An indoor mold assessment professional is permitted to:

(a) Record visual observations and take on-site measurements, including temperature, humidity, and moisture levels, during an initial or post-remediation mold assessment;

(b) Collect samples for mold analysis during a mold assessment;

(c) Plan surveys to identify conditions favorable for indoor mold growth or to determine the presence, extent, amount, or identity of mold or suspected mold in a building;

(d) Conduct activities recommended in a plan developed under paragraph (c) of this subsection and describe and interpret the results of those activities;

(e) Determine locations at which the licensee or individuals under the licensee's supervision shall record observations, take measurements, or collect samples;

(f) Prepare a mold assessment report, including the observations made, measurements taken, and locations and analysis;

(g) Develop a mold management plan for a building or dwelling unit, including recommendations for periodic surveillance, response actions, and prevention and control of indoor mold growth;

(h) Prepare a mold remediation protocol, including the evaluation and selection of appropriate remediation strategies, personal protective equipment, engineering controls, project layout, post-remediation verification evaluation methods and criteria, and preparation of plans and specifications; and

(i) Evaluate a mold remediation project for the purpose of verifying that indoor mold identified for the remediation project has been remediated as outlined in a mold remediation protocol.

3203.2

An indoor mold remediation professional is permitted to:

(a) Perform mold remediation, as defined in § 3299.1;

(b) Prepare a mold remediation work plan providing instructions for the remediation efforts to be performed for a mold remediation project;

(c) Conduct and interpret the results of activities recommended in a mold remediation work plan developed under paragraph (b) of this subsection; and

(d) Complete appropriate sections of a verification report, as defined in § 3299.1.

D.C. Mun. Regs. tit. 20, r. 20-3203

Final Rulemaking published at 63 DCR 6098 (4/22/2016)