D.C. Mun. Regs. tit. 11, r. 11-I539

Current through Register Vol. 71, No. 49, December 6, 2024

Rule 11-I539 - DENSITY - FLOOR AREA RATIO (FAR) (D-5)

539.1

The maximum permitted FAR for a building in the D-5 zone shall be the density achievable within the height and bulk permitted by the zone and any applicable sub-area regulations:

(a) If all of the building's FAR is devoted to residential use;

(b) If all FAR exceeding the non-residential density permitted in SubtitleI § 539.3 is devoted to residential use; or

(c) If conditions (a) or (b) are not satisfied through the use of credits provided for by Subtitle I, Chapters 8 and 9 enable.

539.2

Except for IZ Plus Inclusionary Developments, residential density in the D-5 zone is not subject to the Inclusionary Zoning requirements or bonuses of Subtitle C, Chapter 10.

539.3

The maximum permitted non-residential FAR of a building in the D-5 zone not employing credits in accordance with Subtitle I, Chapters 8 and 9 shall be 6.5.

D.C. Mun. Regs. tit. 11, r. 11-I539

Final Rulemaking published at 63 DCR 2447 (9/6/2016); amended by Final Rulemaking published at 63 DCR 10932 (9/6/2016); amended by Final Rulemaking published at 68 DCR 7216 (7/23/2021)