Statutes, codes, and regulations
Delaware Administrative Code
Title 2 - TransportationDepartment of TransportationDivision of Transportation SolutionsManual on Uniform Traffic Control Devices (MUTCD)Part 2 - Signs
Chapter 2E - GUIDE SIGNS-FREEWAYS AND EXPRESSWAYS
Section 2E.28 - Eisenhower Interstate System Signs (M1-10, M1-10a)

2 Del. Admin. Code § 2E.28

Download
PDF
Current through Register Vol. 28, No. 5, November 1, 2024
Section 2E.28 - Eisenhower Interstate System Signs (M1-10, M1-10a)

Option:

01 The Eisenhower Interstate System (M1-10 and M1-10a) signs (see Figure 2E-18) may be used on Interstate highways at periodic intervals and in rest areas, scenic overlooks, or other similar roadside facilities on the Interstate Highway System.

Guidance:

02 If used, the M1-10a sign should be used only in rest areas or other similar facilities where the sign can be viewed by occupants of parked vehicles or by pedestrians. The M1-10a sign should not be installed on Interstate highway mainlines, ramps, or other roadways where it can be viewed by vehicular traffic.

Standard:

03 The M1-10 and M1-10a signs shall not be used as part of a Junction, Advance Route Turn, Directional, or Trailblazer Assembly or as part of a guide sign or similar assembly providing direction to a route or destination.

2 Del. Admin. Code § 2E.28