Section 14-99g-1 - DefinitionsAs used in Sections 14-99g-1 to 14-99g-8, inclusive, the following words and phrases shall have the following meanings:
(1) "Commissioner" means the commissioner of motor vehicles or his authorized representative;(2) "Department" means the department of motor vehicles;(3) "Glazing" means the material(s) from which the windows of motor vehicles are constructed;(4) "Inspect" means to ascertain, in accordance with accepted inspection procedures, if the vehicle glazing complies with the inspection standards as defined in this section;(5) "Inspection standards" means the standards established by the provisions of section 14-99g of the general statutes;(6) "Light transmittance" means light transmission as defined in subdivision (1) of subsection (a) of section 14-99g, measured in the range of wavelengths from 400 through 700 nanometers, either corrected for the spectral sensitivity of the human eye or centered at 550 nanometers;(7) "Luminous reflectance" means luminous reflectance as defined in subdivision (2) of subsection (a) of section 14-99g, measured in the range of wavelengths from 400 through 700 nanometers, corrected for the spectral sensitivity of the human eye;(8) "Manufacturer" means: (A) A person, firm or corporation which engages in the manufacturing or assembling of sunscreening or tinting products, or materials designed to be used in conjunction with vehicle glazing materials; or(B) A person who fabricates, laminates or tempers the glazing material incorporating the capacity to reflect or to reduce the transmittance of light during the manufacturing process;(9) "Sunscreening material" means a material, including tinting material, which reduces or prevents passage of at least a portion of the sun's energy, and is intended for use with vehicle glazing;(10) "Tinting" means a coloration applied to glazing which reduces light transmittance.Conn. Agencies Regs. § 14-99g-1