2 Colo. Code Regs. § 405-2-213

Current through Register Vol. 48, No. 1, January 10, 2025

Section 2 CCR 405-2-213 - DISPLAY OF CAPACITY INFORMATION AND MANUFACTURER CERTIFICATION OF COMPLIANCE

1. Every monohull vessel less than twenty feet in length, except sailboats, canoes, kayaks, and inflatable boats, the construction of which began after October 31, 1972, sold in the State of Colorado, shall have a permanent writing affixed to the vessel which sets forth:

a. For outboard boats:

(1) The maximum motor horsepower, the maximum persons capacity, and the maximum weight capacity in pounds.

b. For inboard and inboard-outdrive boats:

(1) The maximum persons capacity and the maximum weight capacity in pounds.

c. For boats rated for manual propulsion:

(1) The maximum persons capacity and the maximum weight capacity in pounds.

2. The required capacity information must be permanently displayed on a label or plate which is legible and clearly visible to the operator when getting underway.

3. Every vessel that is subject to U.S. Coast Guard manufacturing safety standards must have a permanently displayed certification label or plate. The certification label may be displayed anywhere on the boat.

4. The capacity information may be combined with the certification label or plate. The entire combined label must be permanently displayed where it is legible and clearly visible to the operator when getting underway.

5. It is unlawful for any person to remove, alter, or tamper with the required capacity information or certification label or plate.

6. Any monohull vessel which is home built for personal recreational use and not for the purposes of sale is exempt from capacity information and certification label or plate display requirements.

2 CCR 405-2-213

37 CR 19, October 10, 2014, effective 11/1/2014

38 CR 07, April 10, 2015, effective 5/1/2015

39 CR 03, February 10, 2016, effective 3/1/2016

39 CR 07, April 10, 2016, effective 5/1/2016