Current through Register Vol. 47, No. 22, November 25, 2024
Regulation Regulation 44-20-404(1)(l) - ANSI REQUIREMENTS1. The board incorporates by reference each of the following versions of the "American National Standard for Four-Wheel All-Terrain Vehicles Equipment Configuration, and Performance Requirements, developed by the Specialty Vehicle Institute of America" (ANSI/SVIA standards) to apply, according to the vehicle model year and date of manufacture, to each four-wheel all-terrain vehicle: a. The ANSI/SVIA-1-2001 Standard to apply to all model year vehicles manufactured from 2001 through April 12, 2009;b. The ANSI/SVIA-1-2007 Standard to apply to all model year vehicles manufactured from April 13, 2009 to April 29, 2012;c. The ANSI/SVIA-1-2010 Standard to apply to all model year vehicles manufactured from April 30, 2012 through 2018:d. The ANSI/SVIA-1-2017 Standard to apply to all model year vehicles manufactured in 2019 and to those vehicles manufactured subsequent to 2019 until such time as the board approves an ANSI/SVIA standard developed to replace the ANSI/SVIA-1-2017 Standard.2. A person licensed by the board under this part 4 must sell a four-wheel all-terrain vehicle in full compliance with the appropriate ANSI/SVIA Standard based upon the vehicle's model year and date of manufacture, except that a person is not required to comply with the ANSI/SVIA-1-2001 Standard, an Industry-initiated voluntary standard, never mandated in law.3. The Specialty Vehicle Institute of America is the author, publisher and copyright-holder of each ANSI/SVIA standard. A certified copy of each published Standard is available for inspection during normal business hours at the Colorado Department of Revenue, Auto Industry Division, 1697 Cole Blvd., Suite 200-A, Lakewood, Colorado 80401. For a reasonable charge as set by the Specialty Vehicle Institute of America, a person can obtain a copy of an ANSI/SVIA standard either from the Auto Industry Division or directly from Specialty Vehicle Institute of America on line at https://svia.org/. Also for a reasonable charge, a person can obtain a certified copy of an ANSI/SVIA standard from the Specialty Vehicle Institute of America, 2 Jenner, Suite 150, Irvine, CA 92618 (949-727-3727).4. This regulation does not include any later amendments or editions following the ANSI/SVIA-1-2017 Standard.1 CCR 205-2, Regulation 44-20-404(1)(l)
43 CR 24, December 25, 2020, effective 11/17/202044 CR 24, December 25, 2021, effective 1/14/202245 CR 03, February 10, 2022, effective 3/17/202245 CR 14, July 25, 2022, effective 8/15/2022