Current through Register Vol. 47, No. 24, December 25, 2024
Section 7 CCR 1101-5-1-8 - Removing a Boiler from Service(a) Boilers removed from service must be done so in a safe manner. This may be accomplished by scrapping the boiler or by putting the boiler into out-of-service status. To safely put a boiler into out-of-service status, physically sever all sources of energy (water, gas, electricity, etc.), cap all fuel lines and disconnect or remove all electrical lines.(b) Prior to placing a boiler back in service, or when a boiler is moved and reinstalled, the boiler shall:(1) Comply with currently-adopted codes and standards in these regulations or be upgraded as determined by the Director.(2) Comply with rules and regulations for new installations.(3) Successfully pass an inspection conducted by a State boiler inspector.40 CR 11, June 10, 2017, effective 7/1/2017