Section 250.33 - Ensuring processing yields of donated foods(a)End product data schedules. The processor must submit an end product data schedule, in a standard electronic format dictated by FNS, for approval before it may process donated foods into end products. For In-State Processing Agreements, the end product data schedule must be approved by the distributing agency and, for products containing donated red meat and poultry, the end product data schedule must also be approved by the Department. For National Processing Agreements, the end product data schedule must be approved by the Department. An end product data schedule must be submitted, and approved, for each new end product that a processor wishes to provide or for a previously approved end product in which the ingredients (or other pertinent information) have been altered. On the end product data schedule, the processor must describe its processing of donated food into an end product, including the following information:(1) A description of the end product;(2) The types and quantities of donated foods included;(3) The types and quantities of other ingredients included;(4) The quantity of end product produced; and(5) The processing yield of donated food, which may be expressed as the quantity (pounds or cases) of donated food needed to produce a specific quantity of end product or as the percentage of raw donated food versus the quantity returned in the finished end product.(b)Processing yields of donated foods. All end products must have a processing yield of donated foods associated with its production and this processing yield must be indicated on its end product data schedule. The processing yield options are limited to 100 percent yield, guaranteed yield, and standard yield.(1) Under 100 percent yield, the processor must ensure that 100 percent of the raw donated food is returned in the finished end product. The processor must replace any processing loss of donated food with commercially purchased food of the same generic identity, of U.S. origin, and equal or better in all USDA procurement specifications than the donated food. The processor must demonstrate such replacement by reporting reductions in donated food inventories on performance reports by the amount of donated food contained in the finished end product rather than the amount that went into production. The Department may approve an exception if a processor experiences a significant manufacturing loss.(2) Under guaranteed yield, the processor must ensure that a specific quantity of end product (i.e., number of cases) will be produced from a specific quantity of donated food (i.e., pounds), as determined by the parties to the processing agreement, and, for In-State Processing Agreements, approved by the Department. If necessary, the processor must use commercially purchased food of the same generic identity, of U.S. origin, and equal or better in all USDA procurement specifications than the donated food to provide the guaranteed number of cases of end product to the distributing or recipient agency, as appropriate. The guaranteed yield must be indicated on the end product data schedule.(3) Under standard yield, the processor must ensure that a specific quantity of end product (i.e., number of cases), as determined by the Department, will be produced from a specific quantity of donated food. The established standard yield is higher than the yield the processor could achieve under normal commercial production and serves to reward those processors that can process donated foods most efficiently. If necessary, the processor must use commercially purchased food of the same generic identity, of U.S. origin, and equal or better in all USDA procurement specifications than the donated food to provide the number of cases required to meet the standard yield to the distributing or recipient agency, as appropriate. The standard yield must be indicated on the end product data schedule.(c)Compensation for loss of donated foods. The processor must compensate the distributing or recipient agency, as appropriate, for the loss of donated foods, or for the loss of commercially purchased foods substituted for donated foods. Such loss may occur, for example, if the processor fails to meet the required processing yield of donated food or fails to produce end products that meet required specifications, if donated foods are spoiled, damaged, or otherwise adulterated at a processing facility, or if end products are improperly distributed. To compensate for such loss, the processor must: (1) Replace the lost donated food or commercial substitute with commercially purchased food of the same generic identity, of U.S. origin, and equal or better in all USDA procurement specifications than the donated food; or(2) Return end products that are wholesome but do not meet required specifications to production for processing into the requisite quantity of end products that meet the required specifications (commonly called rework products); or(3) If the purchase of replacement foods or the reprocessing of products that do not meet the required specifications is not feasible, the processor may, with FNS, distributing agency, or recipient agency approval, dependent on which entity maintains the agreement with the processor, pay the distributing or recipient agency, as appropriate, for the replacement value of the donated food or commercial substitute.(d)Credit for sale of by-products. The processor must credit the distributing or recipient agency, as appropriate, for the sale of any by-products produced in the processing of donated foods. The processor must credit for the net value of such sale, or the market value of the by-products, after subtraction of any documented expenses incurred in preparing the by-product for sale. Crediting must be achieved through invoice reduction or by another means of crediting.(e)Labeling requirements. The processor must ensure that all end product labels meet Federal labeling requirements. A processor that claims end products fulfill meal pattern requirements in child nutrition programs must comply with the procedures required for approval of labels of such end products.