Statutes, codes, and regulations
Code of Federal Regulations
Title 7 - AGRICULTURESubtitle B - REGULATIONS OF THE DEPARTMENT OF AGRICULTUREChapter I - AGRICULTURAL MARKETING SERVICE (STANDARDS, INSPECTIONS, MARKETING PRACTICES), DEPARTMENT OF AGRICULTURESubchapter A - COMMODITY STANDARDS AND CONTAINER REQUIREMENTSPart 42 - STANDARDS FOR CONDITION OF FOOD CONTAINERS
Subpart E - MISCELLANEOUS
Section 42.143 - Operating Characteristic (OC) curves for on-line sampling and inspection

7 C.F.R. § 42.143

Download
PDF
Current through November 30, 2024
Section 42.143 - Operating Characteristic (OC) curves for on-line sampling and inspection
(a) This section contains the Operating Characteristic (OC) curve for each of the on-line cumulative sum sampling plans provided in subpart D. The OC curve and the corresponding cumulative sum sampling plans are listed by AQL.
(b) Different plan parameters used to make acceptance and rejection decisions are provided for each AQL.
(c) The curves show the ability of the various cumulative sum sampling plans to distinguish between good and bad portions of production. The interpretation of these curves for portions of production is similar to the interpretation of the OC curves for stationary lots as illustrated in § 42.140(c) .

Reduced, Normal and Tightened Inspection Plans-Cumulative Sum Sampling Plans and Operating Characteristic (OC) Curves for AQL = 0.25 Defects per Hundred Units

[Sampling plans-AQL = 0.25]

Identification name of OC curves
Reduced Normal Tightened
ng T L S ng T L S ng T L S
13000250.050.950.35500.10.90.3

ng = Number of sample units in a subgroup. T = Subgroup tolerance. L = Acceptance limit. S = Starting value.

View Image

Reduced, Normal, and Tightened Inspection Plans-Cumulative Sum Sampling Plans and Operating Characteristic (OC) Curves for AQL = 1.5 Defects per Hundred Units

[Sampling plans-AQL = 1.5]

Identification name of OC curves
Reduced Normal Tightened
ng T L S ng T L S ng T L S
130.50.50250.521500.81.60.4

ng = Number of sample units in a subgroup. T = Subgroup tolerance. L = Acceptance limit. S = Starting value.

View Image

Reduced, Normal, and Tightened Inspection Plans-Cumulative Sampling Plans and Operating Characteristic (OC) Curves for AQL = 6.5 Defects per Hundred Units

[Sampling Plans-AQL = 6.5]

Identification name of OC curves
Reduced Normal Tightened
ng T L S ng T L S ng T L S
1312125231502.531

ng = Number of sample units in a subgroup. T = Subgroup tolerance. L = Acceptance limit. S = Starting value.

View Image

7 C.F.R. §42.143

45 FR 69424; Oct. 21, 1980. Redesignated at 46 FR 63203, Dec. 31, 1981