Section 300.223 - Purse seine fishing restrictionsNone of the requirements of this section apply in the territorial seas or archipelagic waters of the United States or any other nation, as defined by the domestic laws and regulations of that nation and recognized by the United States, or within the Overlap Area. All dates used in this section are in Universal Coordinated Time, also known as UTC; for example: The year 2013 starts at 00:00 on January 1, 2013 UTC and ends at 24:00 on December 31, 2013 UTC; and July 1, 2013, begins at 00:00 UTC and ends at 24:00 UTC.
(a)Fishing effort limits. This paragraph establishes limits on the number of fishing days that fishing vessels of the United States equipped with purse seine gear may operate in the Convention Area in the area between 20° N latitude and 20° S latitude in a calendar year.(1) For calendar year 2019, there is a limit of 1,616 fishing days in the ELAPS.(2) Beginning in 2020, there is a limit of 1,828 fishing days in the ELAPS per calendar year.(3) NMFS will determine the number of fishing days spent in the ELAPS in each calendar year using data submitted in logbooks and other available information. After NMFS determines that a limit in a calendar year is expected to be reached by a specific future date, and at least seven calendar days in advance of the closure date, NMFS will publish a document in the FEDERAL REGISTER announcing that the purse seine fishery in the area where the limit is expected to be reached will be closed starting on that specific future date and will remain closed until the end of the calendar year.(4) Once a fishery closure is announced pursuant to paragraph (a)(3) of this section, fishing vessels of the United States equipped with purse seine gear may not be used to fish in the closed area during the period specified in the FEDERAL REGISTER document, except that such vessels are not prohibited from bunkering during a fishery closure.(b)Use of fish aggregating devices.(1) During the periods and in the areas specified in paragraph (b)(2) of this section, owners, operators, and crew of fishing vessels of the United States equipped with purse seine gear shall not do any of the activities described below in the Convention Area in the area between 20° N latitude and 20° S latitude:(i) Set a purse seine around a FAD or within one nautical mile of a FAD.(ii) Set a purse seine in a manner intended to capture fish that have aggregated in association with a FAD or a vessel, such as by setting the purse seine in an area from which a FAD or a vessel has been moved or removed within the previous eight hours, or setting the purse seine in an area in which a FAD has been inspected or handled within the previous eight hours, or setting the purse seine in an area into which fish were drawn by a vessel from the vicinity of a FAD or a vessel.(iii) Deploy a FAD into the water.(iv) Repair, clean, maintain, or otherwise service a FAD, including any electronic equipment used in association with a FAD, in the water or on a vessel while at sea, except that: (A) A FAD may be inspected and handled as needed to identify the FAD, identify and release incidentally captured animals, un-foul fishing gear, or prevent damage to property or risk to human safety; and(B) A FAD may be removed from the water and if removed may be repaired, cleaned, maintained, or otherwise serviced, provided that it is not returned to the water.(v) From a purse seine vessel or any associated skiffs, other watercraft or equipment, do any of the following, except in emergencies as needed to prevent human injury or the loss of human life, the loss of the purse seine vessel, skiffs, watercraft or aircraft, or environmental damage:(A) Submerge lights under water;(B) Suspend or hang lights over the side of the purse seine vessel, skiff, watercraft or equipment, or;(C) Direct or use lights in a manner other than as needed to illuminate the deck of the purse seine vessel or associated skiffs, watercraft or equipment, to comply with navigational requirements, and to ensure the health and safety of the crew.(2) The requirements of paragraph (b)(1) of this section shall apply: (i) From July 1 through August 15, in each calendar year;(ii) In any area of high seas, from December 1 through December 31, in each calendar year.(3)(i)Activating FADs for purse seine vessels. A vessel owner, operator, or crew of a fishing vessel of the United States equipped with purse seine gear shall turn on the tracking equipment of an active FAD while the FAD is onboard the vessel and before it is deployed in the water in the Convention Area.(ii)Restrictions on Active FADs for purse seine vessels. U.S. vessel owners and operators of a fishing vessel of the United States equipped with purse seine gear shall not have more than 350 drifting active FADs per vessel in the Convention Area at any one time.(4) FAD design requirements to reduce entanglements. Owners and operators of fishing vessels of the United States equipped with purse seine gear shall ensure that all FADs to be deployed (i.e., are to be placed in the water) from the vessel in the Convention Area comply with the following design requirements: (i)Raft. If the FAD design includes a raft (e.g., flat raft or rolls of material) and if mesh netting is used as part of the structure of the raft, the mesh netting shall have a stretched mesh size less than 7 centimeters and the mesh net must be tightly wrapped such that no netting hangs below the raft when deployed; and(ii)Subsurface. Any netting used in the subsurface structure of the FAD must be tightly tied into bundles ("sausages"), or if not tightly tied into bundles, then must be made of stretched mesh size less than 7 centimeters and be configured as a panel that is weighted on the lower end with enough weight to keep the netting vertically taut in the water column.(d)Catch retention. An owner and operator of a fishing vessel of the United States equipped with purse seine gear must ensure the retention on board at all times while at sea within the Convention Area any bigeye tuna (Thunnus obesus), yellowfin tuna (Thunnus albacares), or skipjack tuna (Katsuwonus pelamis), except in the following circumstances and with the following conditions: (1) Fish that are unfit for human consumption, including but not limited to fish that are spoiled, pulverized, severed, or partially consumed at the time they are brought on board, may be discarded.(2) If at the end of a fishing trip there is insufficient well space to accommodate all the fish captured in a given purse seine set, fish captured in that set may be discarded, provided that no additional purse seine sets are made during the fishing trip.(3) If a serious malfunction of equipment occurs that necessitates that fish be discarded.(e)Observer coverage.(1) A fishing vessel of the United States may not be used to fish with purse seine gear in the Convention Area without a WCPFC observer on board. The requirement in the preceding sentence does not apply to fishing trips that meet one of the following conditions:(i) The portion of the fishing trip within the Convention Area takes place entirely within areas under the jurisdiction of a single nation other than the United States; or,(ii) No fishing takes place during the fishing trip in the Convention Area in the area between 20° N latitude and 20° S latitude; or(iii) The Pacific Islands Regional Administrator has by temporary specification published in the FEDERAL REGISTER modified or suspended the requirement to carry an observer in accordance with § 300.228 .(2) Owners, operators, and crew of fishing vessels subject to paragraph (e)(1) of this section must accommodate WCPFC observers in accordance with the provisions of § 300.215(c) .(3) Meeting either of the conditions in paragraphs (e)(1)(i) and (ii) of this section does not exempt a fishing vessel from having to carry and accommodate a WCPFC observer pursuant to § 300.215 or other applicable regulations.(f)Sea turtle take mitigation measures.(1) Possession and use of required mitigation gear. Any owner or operator of a fishing vessel of the United States equipped with purse seine gear that is used to fish in the Convention Area must carry aboard the vessel the following gear: (i)Dip net. A dip net is intended to facilitate safe handling of sea turtles and access to sea turtles for purposes of removing sea turtles from fishing gear, bringing sea turtles aboard the vessel when appropriate, and releasing sea turtles from the vessel. The minimum design standards for dip nets that meet the requirements of this section are:(A)An extended reach handle. The dip net must have an extended reach handle with a minimum length of 150 percent of the freeboard height. The extended reach handle must be made of wood or other rigid material able to support a minimum of 100 lb (34.1 kg) without breaking or significant bending or distortion.(B)Size of dip net. The dip net must have a net hoop of at least 31 inches (78.74 cm) inside diameter and a bag depth of at least 38 inches (96.52 cm). The bag mesh openings may be no more than 3 inches 3 inches (7.62 cm 7.62 cm) in size.(ii)Optional turtle hoist. A turtle hoist is used for the same purpose as a dip net. It is not a required piece of gear, but a turtle hoist may be carried on board and used instead of the dip net to handle sea turtles as required in paragraph (f)(2) of this section. The minimum design standards for turtle hoists that are used instead of dip nets to meet the requirements of this section are: (A)Frame and net. The turtle hoist must consist of one or more rigid frames to which a bag of mesh netting is securely attached. The frame or smallest of the frames must have a minimum opening (e.g., inside diameter, if circular in shape) of 31 inches (78.74 cm) and be capable of supporting a minimum of 100 lb (34.1 kg). The frame or frames may be hinged or otherwise designed so they can be folded for ease of storage, provided that they have no sharp edges and can be quickly reassembled. The bag mesh openings may be no more than 3 inches * 3 inches (7.62 cm * 7.62 cm) in size.(B)Lines. Lines used to lower and raise the frame and net must be securely attached to the frame in multiple places such that the frame remains stable when lowered and raised.(2)Handling requirements. Any owner or operator of a fishing vessel of the United States equipped with purse seine gear that is used to fish in the Convention Area must, if a sea turtle is observed to be enclosed or entangled in a purse seine, a FAD, or other fishing gear, comply with these handling requirements, including using the required mitigation gear specified in paragraph (f)(1) of this section as prescribed in these handling requirements. Any captured or entangled sea turtle must be handled in a manner to minimize injury and promote survival. (i)Sea turtles enclosed in purse seines. If the sea turtle is observed enclosed in a purse seine but not entangled, it must be released immediately from the purse seine with the dip net or turtle hoist.(ii)Sea turtles entangled in purse seines. If the sea turtle is observed entangled in a purse seine, the net roll must be stopped as soon as the sea turtle comes out of the water, and must not start again until the turtle has been disentangled and released. The sea turtle must be handled and released in accordance with paragraphs (f)(2)(iv), (f)(2)(v), (f)(2)(vi), and (f)(2)(vii) of this section.(iii)Sea turtles entangled in FADs. If the sea turtle is observed entangled in a FAD, it must be disentangled or the FAD must be cut immediately so as to remove the sea turtle. The sea turtle must be handled and released in accordance with paragraphs (f)(2)(iv), (f)(2)(v), (f)(2)(vi), and (f)(2)(vii) of this section.(iv)Disentangled sea turtles that cannot be brought aboard. After disentanglement, if the sea turtle is not already on board the vessel and it is too large to be brought aboard or cannot be brought aboard without sustaining further injury, it shall be left where it is in the water, or gently moved, using the dip net or turtle hoist if necessary, to an area away from the fishing gear and away from the propeller.(v)Disentangled sea turtles that can be brought aboard. After disentanglement, if the sea turtle is not too large to be brought aboard and can be brought aboard without sustaining further injury, the following actions shall be taken: (A) Using the dip net or a turtle hoist, the sea turtle must be brought aboard immediately; and(B) The sea turtle must be handled in accordance with the procedures in paragraphs (f)(2)(vi) and (f)(2)(vii) of this section.(vi)Sea turtle resuscitation. If a sea turtle brought aboard appears dead or comatose, the following actions must be taken: (A) The sea turtle must be placed on its belly (on the bottom shell or plastron) so that it is right side up and its hindquarters elevated at least 6 inches (15.24 cm) for a period of no less than 4 hours and no more than 24 hours. The amount of the elevation varies with the size of the sea turtle; greater elevations are needed for larger sea turtles;(B) A reflex test must be administered at least once every 3 hours. The test is to be performed by gently touching the eye and pinching the tail of a sea turtle to determine if the sea turtle is responsive;(C) The sea turtle must be kept shaded and damp or moist (but under no circumstances place the sea turtle into a container holding water). A water-soaked towel placed over the eyes (not covering the nostrils), carapace and flippers is the most effective method of keeping a sea turtle moist; and(D) If the sea turtle revives and becomes active, it must be returned to the sea in the manner described in paragraph (f)(2)(vii) of this section. Sea turtles that fail to revive within the 24-hour period must also be returned to the sea in the manner described in paragraph (f)(2)(vii) of this section, unless NMFS requests that the turtle or part thereof be kept on board and delivered to NMFS for research purposes.(vii)Sea turtle release. After handling a sea turtle in accordance with the requirements of paragraphs (f)(2)(v) and (f)(2)(vi) of this section, the sea turtle must be returned to the ocean after identification unless NMFS requests the retention of a dead sea turtle for research. In releasing a sea turtle the vessel owner or operator must:(A) Place the vessel engine in neutral gear so that the propeller is disengaged and the vessel is stopped;(B) Using the dip net or a turtle hoist to release the sea turtle with little impact, gently release the sea turtle away from any deployed gear; and(C) Observe that the turtle is safely away from the vessel before engaging the propeller and continuing operations.(viii)Other sea turtle requirements. No sea turtle, including a dead turtle, may be consumed or sold. A sea turtle may be landed, offloaded, transshipped or kept below deck only if NMFS requests the retention of a dead sea turtle or a part thereof for research.(g) Owners, operators, and crew of fishing vessels of the United States used for commercial fishing for HMS in the Convention Area shall not set or attempt to set a purse seine in the Convention Area on or around a whale shark (Rhincodon typus) if the animal is sighted at any time prior to the commencement of the set or the attempted set. This paragraph does not apply to the territorial seas or archipelagic waters of any nation, as defined by the domestic laws and regulations of that nation and recognized by the United States, or to areas under the national jurisdiction of the Parties to the Nauru Agreement.(h) The crew, operator, and owner of a fishing vessel of the United States used for commercial fishing for HMS in the Convention Area must release any whale shark that is encircled in a purse seine net in the Convention Area, and take reasonable steps for its safe release, without compromising the safety of any persons. This paragraph does not apply to the territorial seas or archipelagic waters of any nation, as defined by the domestic laws and regulations of that nation and recognized by the United States.74 FR 38554, Aug. 4, 2009, as amended at 76 FR 82183, Dec. 30, 2011; 77 FR 71513, Dec. 3, 2012; 78 FR 30778, May 23, 2013; 80 FR 8815, Feb. 19, 2015; 80 FR 29223, May 21, 2015; 80 FR 51480, Aug. 25, 2015; 80 FR 59048, Oct. 1, 2015; 81 FR 41250, June 24, 2016; 83 FR 33869, July 18, 2018; 84 FR 37148, July 31, 2019; 85 FR 37390, June 22, 2020; 86 FR 31181, June 11, 2021; 88 FR 30678, May 12, 2023; 89 FR 70124, Aug. 29, 2024 81 FR 33149, 5/25/2016; 81 FR 41250, 6/24/2016; 83 FR 33869, 7/18/2018; 84 FR 37148, 7/31/2019; 85 FR 37390, 7/22/2020; 86 FR 31181, 6/11/2021; 88 FR 30672, 6/12/2023; 89 FR 70124, 8/29/2024