Section 260.86 - Approved identification(a)Grade marks: The approved grade mark or identification may be used on containers, labels, or otherwise indicated for any processed product that:(1) Has been packed under inspection as provided in this part to assure compliance with the requirements for wholesomeness established for the raw product and of sanitation established for the preparation and processing operations, and(2) has been certified by an inspector as meeting the requirements of such grade, quality or classification. The grade marks approved for use shall be similar in form and design to the examples of Figures 1 to 5 of this section.
Shield using red, white, and blue background or other colors appropriate for label.
View Image
FIGURE 1
Shield with plain background.
View Image
FIGURE 2
View Image
FIGURE 3
View Image
FIGURE 4
View Image
FIGURE 5
(b)Inspection marks: The approved inspection marks may be used on containers, labels, or otherwise indicated for any processed product that:(1) Has been packed under inspection as provided in this part to assure compliance with the requirements for wholesomeness established for the raw product and of sanitation established for the preparation and processing operations, and(2) has been certified by an inspector as meeting the requirements of such quality or grade classification as may be approved by the Secretary. The inspection marks approved for use shall be similar in form and design to the examples in Figures 6, 7, and 8 of this section.
Statement enclosed within a circle.
View Image
FIGURE 6
Statement without the use of the circle.
View Image
FIGURE 7
Statement without the use of the circle.
View Image
FIGURE 8
(c)Combined grade and inspection marks: The grade marks set forth in paragraph (a) of this section, and the inspection marks, Figures 7 and 8, set forth in paragraph (b) of this section, may be combined into a consolidated grade and inspection mark for use on processed products that have been packed under inspection as provided in this part.(d)Products not eligible for approved identification: Processed products which have not been packed under inspection as provided in this part shall not be identified by approved grade or inspection marks, but such products may be inspected on a lot inspection basis as provided in this part and identified by an authorized representative of the Department by stamping the shipping cases and inspection certificate(s) covering such lot(s) as appropriate, with marks similar in form and design to the examples in Figures 9 and 10 of this section. View Image
FIGURE 9
View Image
FIGURE 10
(e)Removal of labels bearing inspection marks: At the time a lot of fishery products is found to be mislabeled and the labels on the packages are not removed within ten (10) consecutive calendar days, the following procedure shall be applicable: (1) The processor, under the supervision of the inspector, shall clearly and conspicuously mark all master cases in the lot by means of a "rejected by USDC Inspector" stamp provided by the Department.(2) The processor shall be held accountable to the Department for all mislabeled products until the products are properly labeled.(3) Clearance for the release of the relabeled products shall be obtained by the processor from the inspector.(f) Users of inspection services having an inventory of labels which bear official approved identification marks stating "U.S. Department of the Interior" or otherwise referencing the Interior Department, will be permitted to use such marks until December 31, 1971, except that upon written request the Director, National Marine Fisheries Service, may extend such period for the use of specific labels.36 FR 4609, Mar. 10, 1971