Section 217.325 - [Effective 3/27/2025] [Effective until 3/26/2030] Monitoring and reporting requirementsLOA Holder must implement the following monitoring and reporting requirements when conducting the specified activities:
(a)Protected species observer (PSO) and passive acoustic monitoring (PAM) operator qualifications. LOA Holder must implement the following measures applicable to PSOs and PAM operators:(1) LOA Holder must use independent, NMFS-approved PSOs and PAM operators meaning that the PSOs and PAM operators must be employed by a third-party observer provider, must have no tasks other than to conduct observational effort, collect data, and communicate with and instruct relevant crew with regard to the presence of protected species and mitigation requirements;(2) All PSOs and PAM operators must have successfully attained a bachelor's degree from an accredited college or university with a major in one of the natural sciences, a minimum of 30 semester hours or equivalent in the biological sciences, and at least one undergraduate course in math or statistics. The educational requirements may be waived if the PSO or PAM operator has acquired the relevant skills through a suitable amount of alternate experience. Requests for such a waiver must be submitted to NMFS Office of Protected Resources and must include written justification containing alternative experience. Alternate experience that may be considered includes but is not limited to: previous work experience conducting academic, commercial, or government sponsored marine mammal visual and/or acoustic surveys; or previous work experience as a PSO/PAM operator. All PSO's and PAM operators should demonstrate good standing and consistently good performance of all assigned duties;(3) All PSOs and PAM operators must successfully complete a required training course within the last 5 years, including obtaining a certificate of course completion;(4) PSOs must have visual acuity in both eyes (with correction of vision being permissible) sufficient enough to discern moving targets on the water's surface with the ability to estimate the target size and distance (binocular use is allowable); ability to conduct field observations and collect data according to the assigned protocols; sufficient training, orientation, or experience with the construction operation to provide for personal safety during observations; writing skills sufficient to document observations, including but not limited to, the number and species of marine mammals observed, the dates and times of when in-water construction activities were conducted, the dates and time when in-water construction activities were suspended to avoid potential incidental take of marine mammals from construction noise within a defined shutdown zone, and marine mammal behavior; and the ability to communicate orally, by radio, or in-person, with project personnel to provide real-time information on marine mammals observed in the area;(5) PSOs and PAM operators are responsible for obtaining NMFS' approval. NMFS may approve PSOs and PAM operators as conditional or unconditional. A conditionally-approved PSO or PAM operator may be one who has completed training in the last 5 years but has not yet attained the requisite field experience. An unconditionally approved PSO or PAM operator is one who has completed training within the last 5 years and attained the necessary experience (i.e., demonstrate experience with monitoring for marine mammals at clearance and shutdown zone sizes similar to those produced during the respective activity). Lead PSO(s) and Lead PAM operator(s) must be unconditionally approved and have a minimum of 90 days in a northwestern Atlantic Ocean offshore environment performing the role (either visual or acoustic), with the conclusion of the most recent relevant experience not more than 18 months previous. A conditionally approved PSO or PAM operator must be paired with an unconditionally approved PSO or PAM operator;(i) PSOs for HRG surveys may be unconditionally or conditionally approved. PSOs and PAM operators for foundation installation and UXO/MEC detonation must be unconditionally approved;(ii) LOA Holder must submit NMFS previously approved PSOs and PAM operators to NMFS Office of Protected Resources for review and confirmation of their approval for specific roles at least 30 days prior to commencement of the activities requiring PSOs/PAM operators or 15 days prior to when new PSOs/PAM operators are required after activities have commenced;(iii) For prospective PSOs and PAM operators not previously approved, or for PSOs and PAM operators whose approval is not current, LOA Holder must submit resumes for approval at least 60 days prior to PSO and PAM operator use. Resumes must include information related to relevant education, experience, and training, including dates, duration, location, and description of prior PSO or PAM operator experience. Resumes must be accompanied by relevant documentation of successful completion of necessary training and include which specific roles and activities the PSOs/PAM operators are being requested for. PAM operator experience must also include the information described in paragraph (a)(5)(iv) of this section;(iv) PAM operators are responsible for obtaining NMFS approval. To be approved as a PAM operator, the person must meet the following qualifications: The PAM operator must demonstrate that they have prior large whale PAM experience with real-time acoustic detection systems and/or have completed specialized training for operating PAM systems that will be used for the Project; PAM operators must demonstrate that they are able to detect and identify Atlantic Ocean marine mammals sounds, in particular: North Atlantic right whale sounds, humpback whale sounds, and that they are able to deconflict humpback whale sounds from similar North Atlantic right whale sounds, and other co-occurring species' sounds in the area including sperm whales; must be able to distinguish between whether a marine mammal or other species sound is detected, possibly detected, or not detected and similar terminology must be used across companies/projects; where localization of sounds or deriving bearings and distance are possible, the PAM operators must have demonstrated experience in the localization of sounds or deriving bearings and distance; PAM operators must be independent observers (i.e., not construction personnel); PAM operators must demonstrate experience with relevant acoustic software and equipment; PAM operators must have the qualifications and relevant experience/training to safely deploy and retrieve equipment and program the software, as necessary; PAM operators must be able to test software and hardware functionality prior to operation; and PAM operators must have evaluated their acoustic detection software using the PAM Atlantic baleen whale annotated data set available at National Centers for Environmental Information (NCEI) and provide evaluation/performance metric;(6) All PSOs must be trained in northwestern Atlantic Ocean marine mammal identification and behaviors and must be able to conduct field observations and collect data according to assigned protocols. Additionally, PSOs must have the ability to work with all required and relevant software and equipment necessary during observations (as described in paragraphs (b)(5) and (6) of this section);(7) At least one on-duty PSO and PAM operator, where applicable, for each activity (i.e., foundation installation, UXO/MEC detonation activities, and HRG surveys) must be designated as the Lead PSO. The Lead PSO must be unconditionally approved; and(8) PSOs may work as PAM operators and vice versa, pending NMFS-approval; however, they may only perform one role at any one time and must not exceed work time restrictions, which will be tallied cumulatively.(b)General PSO and PAM operator requirements. The following measures apply to PSOs and PAM operators and must be implemented by LOA Holder:(1) PSOs must monitor for marine mammals prior to, during, and following pile driving, drilling, UXO/MEC detonation activities, and HRG surveys that use sub- bottom profilers (with specific monitoring durations and needs described in paragraphs (c) through (f) of this section, respectively). Monitoring must be done while free from distractions and in a consistent, systematic, and diligent manner;(2) PAM operator(s) must acoustically monitor for marine mammals prior to, during, and following all pile driving, drilling, and UXO/MEC detonation activities. PAM operators may be located on a vessel or remotely on-shore but must have the appropriate equipment (i.e., computer station equipped with a data collection software system available wherever they are stationed) and be in real-time communication with PSOs and transiting vessel captains;(3) All PSOs must be located at the best vantage point(s) on any platform, as determined by the Lead PSO, in order to obtain 360-degree visual coverage of the entire clearance and shutdown zones around the activity area, and as much of the Level B harassment zone as possible, PAM operators may be located on a vessel or remotely on-shore. The PAM operator(s) must assist PSOs in ensuring full coverage of the clearance and shutdown zones;(4) All on-duty visual PSOs must remain in real-time contact with the on-duty PAM operator(s). PAM operators must immediately communicate all acoustic detections of marine mammals to PSOs, including any determination regarding species identification, distance, and bearing (where relevant) relative to the pile being driven and the degree of confidence (e.g., detected, possibly detected, not detected) in the determination. All on-duty Lead PSOs and PAM operator(s) must remain in contact with the on-duty construction personnel responsible for implementing mitigations (e.g., delay to pile driving or UXO/MEC detonation) to ensure communication on marine mammal observations can easily, quickly, and consistently occur between all on-duty PSOs, PAM operator(s), and on-water Project personnel. (i) The on-duty PAM operator(s) must inform the on-duty Lead PSO(s) of animal detections approaching or within applicable ranges of interest to the activity occurring via the data collection software system, (e.g., Mysticetus or similar system) who must be responsible for requesting that the designated crewmember implement the necessary mitigation procedures (i.e., delay, shutdown); and(ii) Any visual observations of marine mammals by any Project personnel must be communicated immediately to on-duty PSOs and vessel captains associated with other Project vessels to increase situational awareness.(5) PSOs must use high magnification (25x) binoculars, standard handheld (7x) binoculars, and the naked eye to search continuously for marine mammals. During pile driving and drilling, at least the PSOs on the pile driving and drilling platform(s) and any dedicated PSO vessel that may be used must be equipped with functional Big Eye binoculars (e.g., 25 x 150; 2.7 view angle; individual ocular focus; height control). These must be pedestal mounted on the deck at the best vantage point that provides for optimal sea surface observation and PSO safety. A minimum of three on-duty PSOs must be active on a dedicated PSO vessel. PAM operators must have the appropriate equipment (i.e., a computer station equipped with a data collection software system available wherever they are stationed) in accordance with a NMFS-approved PAM Plan;(6) During all acoustic monitoring periods during the Project, PAM operators must use PAM systems approved by NMFS;(7) During periods of low visibility (e.g., darkness, rain, fog, poor weather conditions, etc.), PSOs must use alternative technology (e.g., infrared or thermal cameras) to monitor the clearance and shutdown zones as approved by NMFS;(8) PSOs and PAM operators must not exceed 4 consecutive watch hours on duty at any time, must have a 2-hour (minimum) break between watches, and must not exceed a combined watch schedule of more than 12 hours in a 24-hour period;(9) Any PSO or PAM operator has the authority to call for a delay or shutdown of project activities;(10) PSOs must remain in real-time contact with the PAM operators and construction personnel responsible for implementing mitigation (e.g., delay to pile driving or UXO/MEC detonation) to ensure communication on marine mammal observations can easily, quickly, and consistently occur between all on-duty PSOs, PAM operator(s), and on-water Project personnel; and(11) LOA Holder is required to use available sources of information on North Atlantic right whale presence to aid in monitoring efforts. These include daily monitoring of the Right Whale Sightings Advisory System, consulting of the WhaleAlert app, and monitoring of the Coast Guard's VHF Channel 16 throughout the day to receive notifications of any sightings and information associated with any DMA, to plan construction activities and vessel routes, if practicable, to minimize the potential for co-occurrence with North Atlantic right whales.(c)PSO and PAM operator requirements during WTG and ESP foundation installation. The following measures apply to PSOs and PAM operators during WTG and ESP foundation installation and must be implemented by LOA Holder:(1) PSOs and PAM operator(s) must monitor for marine mammals 60 minutes prior to, during, and 30 minutes following all pile-driving and drilling. If PSOs cannot visually monitor the minimum visibility zone prior to pile driving and drilling at all times using the equipment described in paragraphs (b)(5) and (7) of this section, pile driving and drilling operations must not commence or must shutdown if they are currently active;(2) All PSOs and PAM operators must begin monitoring 60 minutes prior to pile driving and drilling, during, and for 30 minutes after the activity. Pile driving and drilling must only commence when the minimum visibility zone is fully visible (e.g., not obscured by darkness, rain, fog, etc.) and the clearance zones are clear of marine mammals for at least 30 minutes, as determined by the Lead PSO, immediately prior to the initiation of pile driving or drilling. PAM operators must assist the visual PSOs in monitoring by conducting PAM activities 60 minutes prior to any pile driving or drilling, during, and after for 30 minutes for the appropriate size PAM clearance zone (dependent on season). The entire minimum visibility zone must be clear for at least 30 minutes, with no marine mammal detections within the visual or PAM clearance zones prior to the start of pile driving or drilling;(3) LOA Holder must conduct PAM for at least 24 hours immediately prior to pile driving and drilling activities, The PAM operator must review all detections from the previous 24-hour period immediately prior to pile driving or drilling.(4) During use of any real-time PAM system, at least one PAM operator must be designated to monitor each system by viewing data or data products that would be streamed in real-time or in near real-time to a computer workstation and monitor;(5) The PAM operator must inform the Lead PSO(s) on duty of animal detections approaching or within applicable ranges of interest to the pile driving activity via the data collection software system (i.e., Mysticetus or similar system) who will be responsible for requesting that the designated crewmember implement the necessary mitigation procedures (i.e., delay or shutdown);(6) All monitoring and reporting measures required for or applicable to jacket foundations are required for bottom-frame foundations that utilize pile foundations;(7) LOA Holder must prepare and submit a Marine Mammal Monitoring Plan to NMFS Office of Protected Resources for review and approval at least 180 days before the planned start of any pile driving or drilling and abide by the plan if approved. LOA Holder must obtain both NMFS Office of Protected Resources and NMFS Greater Atlantic Regional Fisheries Office Protected Resources Division's concurrence with this plan prior to the start of any pile driving or drilling. The plan must include final foundation project design (e.g., number and type of piles, hammer type, noise abatement systems, anticipated start date, etc.) and all information related to PAM and PSO monitoring protocols for foundation installation activities. No foundation pile installation can occur without NMFS' approval of the plan;(8) LOA Holder must submit an SFV plan to NMFS Office of Protected Resources for review and approval at least 180 days prior to planned start of foundation installation activities and abide by the plan if approved. At minimum, the SFV Plan must describe how LOA Holder would ensure that the required foundation installation sites selected for SFV measurements are representative of the rest of the installation sites such that future pile installation events are anticipated to produce similar sound levels to those piles measured. In the case that these sites/scenarios are not determined to be representative of all other pile installation sites, LOA Holder must include information in the SFV Plan on how additional sites/scenarios would be selected for SFV measurements. This SFV Plan must also include methodology for collecting, analyzing, and preparing SFV measurement data for submission to NMFS Office of Protected Resources and describe how the effectiveness of the noise attenuation methodology would be evaluated based on the results. SFV for pile driving and drilling must not occur until NMFS approves the SFV Plan for this activity;(9) LOA Holder must submit a Passive Acoustic Monitoring Plan (PAM Plan) to NMFS Office of Protected Resources for review and approval at least 180 days prior to the planned start of foundation installation activities and abide by the plan if approved. The PAM Plan must include a description of all proposed PAM equipment, address how the proposed passive acoustic monitoring must follow standardized measurement, processing methods, reporting metrics, and metadata standards for offshore wind. The plan must describe all proposed PAM equipment, procedures, and protocols including proof that vocalizing North Atlantic right whales will be detected within the PAM Monitoring Zone. No pile installation can occur if LOA Holder's PAM Plan does not receive approval from NMFS Office of Protected Resources and NMFS GARFO Protected Resources Division; and(10) LOA Holder must submit a Nighttime Monitoring Plan for foundation installation if LOA Holder intends to pile drive or drill outside the daily restriction in § 217.324(c). This plan must be submitted to NMFS Office of Protected Resources at least 180 calendar days before foundation installation is planned to begin. This plan(s) must contain a thorough description of how LOA Holder will monitor foundation installation activities (drilling, vibratory and impact pile driving) and at night, including proof of the efficacy of monitoring devices (e.g., mounted thermal/infrared camera systems, hand-held or wearable NVDs, spotlights) in detecting marine mammals over the full extent of the required clearance and shutdown zones, including demonstration that the full extent of the minimum visibility zones can be effectively and reliably monitored. The plan must identify the efficacy of the technology at detecting marine mammals and sea turtles in the clearance and shutdown zones under all the various conditions anticipated during construction, including varying weather conditions, sea states, and in consideration of the use of artificial lighting. If the plan does not include a full description of the proposed technology, monitoring methodology, and data demonstrating to NMFS' satisfaction that marine mammals can reliably and effectively be detected within the clearance and shutdown zones for monopiles and jacket foundations before and during foundation installation (drilling, vibratory and impact pile driving), nighttime foundation installation must not occur; the only exception would be if safety necessitates continuing pile installation after dark for a foundation that was initiated 1.5 hours prior to civil sunset, in which case the Low Visibility components of the Monitoring Plan would be implemented.(d)PSO requirements during UXO/MEC detonations. The following measures apply to PSOs UXO/MEC detonations and must be implemented by LOA Holder:(1) All on-duty visual PSOs must remain in contact with the on-duty PAM operator, who would monitor the PAM systems for acoustic detections of marine mammals in the area, regarding any animal detection that might be approaching or found within the applicable zones no matter where the PAM operator is stationed (e.g., onshore or on a vessel);(2) If PSOs cannot visually monitor the clearance zone at all times using the equipment described in paragraphs (b)(5) and (7) of this section; UXO/MEC operations must not commence or must shutdown if they are currently active;(3) All PSOs must begin monitoring 60 minutes prior to UXO/MEC detonation, during, and for 30 minutes after the activity. UXO/MEC detonation must only commence when the minimum visibility zone is fully visible (e.g., not obscured by darkness, rain, fog, etc.) and the clearance zones are clear of marine mammals for at least 30 minutes, as determined by the Lead PSO, immediately prior to the initiation of detonation. PAM operators must assist the visual PSOs in monitoring by conducting PAM activities 60 minutes prior to any UXO/MEC detonation, during, and after for 30 minutes for the appropriate size PAM clearance zone. The entire clearance zone must be clear for at least 30 minutes, with no marine mammal detections within the visual or PAM clearance zones prior to the initiation of detonation;(4) For North Atlantic right whales, any visual or acoustic detection must trigger a delay to the commencement of UXO/MEC detonation. In the event that a large whale is sighted or acoustically detected that cannot be confirmed by species, it must be treated as if it were a North Atlantic right whale;(5) LOA Holder must conduct PAM for at least 24 hours immediately prior to foundation installation and UXO/MEC detonation activities;(6) During use of any real-time PAM system, at least one PAM operator must be designated to monitor each system by viewing data or data products that would be streamed in real-time or in near real-time to a computer workstation and monitor;(7) LOA Holder must use a minimum of one PAM operator to actively monitor for marine mammals before, during, and after UXO/MEC detonation. The PAM operator must assist visual PSOs in ensuring full coverage of the clearance and shutdown zones. The PAM operator must inform the Lead PSO(s) on duty of animal detections approaching or within applicable ranges of interest to the activity occurring via the data collection software system (i.e., Mysticetus or similar system) who will be responsible for requesting that the designated crewmember implement the necessary mitigation procedures (i.e., delay or shutdown);(8) PSOs and PAM operators must be on watch for a maximum of 4 consecutive hours, followed by a break of at least 2 hours between watches, and may not exceed a combined watch schedule of more than 12 hours in a single 24-hour period;(9) LOA Holder must prepare and submit a Marine Mammal Monitoring Plan to NMFS Office of Protected Resources for review and approval at least 180 days before the start of any detonation and abide by the plan if approved. LOA Holder must obtain both NMFS Office of Protected Resources and NMFS Greater Atlantic Regional Fisheries Office Protected Resources Division's concurrence with this Plan prior to the start of any UXO/MEC detonation. The plan must include a description of how all relevant mitigation and monitoring requirements contained in the LOA and those included as part of the action will be implemented; a pile driving installation summary and sequence of events; a description of all monitoring equipment and evidence (i.e., manufacturer's specifications, reports, testing) that it can be used to effectively monitor and detect marine mammals in the identified clearance and shutdown zones (i.e., field data demonstrating reliable and consistent ability to detect large whales at the relevant distances in the conditions planned for use); communications and reporting details; final UXO/MEC detonation project design (e.g., number and type of UXO/MECs, removal method(s), charge weight(s), anticipated start date, etc.) and all information related to PAM and PSO monitoring protocols (including number and location of PSOs) for UXO/MEC activities. The Plan(s) must demonstrate sufficient PSO and PAM Operator staffing (in accordance with watch shifts), PSO and PAM Operator schedules, and contingency plans for instances if additional PSOs and PAM Operators are required including any expansion of clearance and/or shutdown zones that may be required as a result of SFV. The plan(s) must contain a thorough description of how LOA Holder will monitor foundation installation activities (drilling, vibratory and impact pile driving) during reduced visibility conditions (e.g. rain, fog) and in other low visibility conditions, including proof of the efficacy of monitoring devices (e.g., mounted thermal/infrared camera systems, hand-held or wearable NVDs, spotlights) in detecting marine mammals over the full extent of the required clearance and shutdown zones, including demonstration that the full extent of the minimum visibility zones can be effectively and reliably monitored. The plan must identify the efficacy of the technology at detecting marine mammals in the clearance and shutdown zones under all the various conditions anticipated during construction, including varying weather conditions, sea states, and in consideration of the use of artificial lighting. The plan must contain a thorough description of how LOA Holder will monitor foundation installation activities during daytime when unexpected changes to lighting or weather occur during pile driving that prevent visual monitoring of the full extent of the clearance and shutdown zones. No UXO/MEC detonation can occur without NMFS' approval of the Plan;(10) A Passive Acoustic Monitoring Plan ("PAM Plan") must be submitted to NMFS Office of Protected Resources for review and approval at least 180 days prior to the planned start of foundation installation and prior to the start of any UXO/MEC detonation(s). The authorization to take marine mammals would be contingent upon NMFS Office of Protected Resources approval of the PAM Plan. The Plan must include a description of all proposed PAM equipment and hardware, the calibration data, bandwidth capability and sensitivity of hydrophones, and address how the proposed passive acoustic monitoring will follow standardized measurement, processing methods, reporting metrics, and metadata standards for offshore wind (Van Parijs et al., 2021). The Plan must describe and include all procedures, documentation, and protocols including information (i.e., testing, reports, equipment specifications) to support that it will be able to detect vocalizing whales within the clearance and shutdown zones, including deployment locations, procedures, detection review methodology, and protocols; hydrophone detection ranges with and without foundation installation activities and data supporting those ranges; communication time between call and detection, and data transmission rates between PAM Operator and PSOs on the pile driving vessel; where PAM Operators will be stationed relative to hydrophones and PSOs on pile driving vessel calling for delay/shutdowns; and a full description of all proposed software, call detectors, and filters. The Plan must also incorporate the requirements relative to North Atlantic right whale reporting. No UXO/MEC detonation can occur if LOA Holder's PAM Plan does not receive approval from NMFS Office of Protected Resources and NMFS GARFO Protected Resources Division; and(11) LOA Holder must submit an SFV plan to NMFS Office of Protected Resources for review and approval at least 180 days prior to planned UXO/MEC detonation activities and abide by the plan if approved. LOA Holder must obtain both NMFS Office of Protected Resources and NMFS GARFO Protected Resources Division's concurrence with this Plan prior to the start of any UXO/MEC detonations. At minimum, the SFV Plan must include methodology for collecting, analyzing, and preparing SFV measurement data for submission to NMFS Office of Protected Resources and describe how the effectiveness of the noise attenuation methodology would be evaluated based on the results. SFV for UXO/MEC detonation must not occur until NMFS approves the SFV Plan for this activity.(e)PSO requirements during HRG surveys. The following measures apply to PSOs during HRG surveys using boomers, and sparkers and must be implemented by LOA Holder: (1) Between four and six PSOs must be present on every 24-hour survey vessel and two to three PSOs must be present on every 12-hour survey vessel;(2) At least one PSO must be on active duty monitoring during HRG surveys conducted during daylight (i.e., from 30 minutes prior to civil sunrise through 30 minutes following civil sunset) and at least two PSOs must be on activity duty monitoring during HRG surveys conducted at night;(3) PSOs on HRG vessels must begin monitoring 30 minutes prior to activating acoustic sources, during the use of these acoustic sources, and for 30 minutes after use of these acoustic sources has ceased. Any observations of marine mammals must be communicated to PSOs on all nearby survey vessels during concurrent HRG surveys; and(4) During daylight hours when survey equipment is not operating, LOA Holder must ensure that visual PSOs conduct, as rotation schedules allow, observations for comparison of sighting rates and behavior with and without use of the specified acoustic sources. Off-effort PSO monitoring must be reflected in the monthly PSO monitoring reports.(f)Reporting. LOA Holder must comply with the following reporting measures: (1) Prior to initiation of the specified activities, LOA Holder must demonstrate in a report submitted to NMFS Office of Protected Resources that all required training for LOA Holder personnel (including the vessel crews, vessel captains, PSOs, and PAM operators) has been completed;(2) LOA Holder must use a standardized reporting system during the effective period of the LOA. All data collected related to the Project must be recorded using industry-standard software that is installed on field laptops and/or tablets. Unless stated otherwise, all reports must be submitted to NMFS Office of Protected Resources (PR.ITP.MonitoringReports@noaa.gov), dates must be in MM/DD/YYYY format, and location information must be provided in Decimal Degrees and with the coordinate system information (e.g., NAD83, WGS84, etc.);(3) For all monitoring efforts and marine mammal sightings, the following information must be collected and reported to NMFS Office of Protected Resources: Date and time that monitored activity begins or ends; the construction activities occurring during each observation period; the watch status (i.e., sighting made by PSO on/off effort, opportunistic, crew, alternate vessel/platform); the PSO who sighted the animal; the time of sighting; the weather parameters (e.g., wind speed, percent cloud cover, visibility); the water conditions (e.g., Beaufort sea state, tide state, water depth); all marine mammal sightings, regardless of distance from the construction activity; species (or lowest possible taxonomic level possible); the pace of the animal(s); the estimated number of animals (minimum/maximum/high/low/best); the estimated number of animals by cohort (e.g., adults, yearlings, juveniles, calves, group composition, etc.); the description (i.e., as many distinguishing features as possible of each individual seen, including length, shape, color, pattern, scars or markings, shape and size of dorsal fin, shape of head, and blow characteristics); the description of any marine mammal behavioral observations (e.g., observed behaviors such as feeding or traveling) and observed changes in behavior, including an assessment of behavioral responses thought to have resulted from the specific activity; the animal's closest distance and bearing from the pile being driven or specified HRG equipment and estimated time entered or spent within the Level A harassment and/or Level B harassment zone(s); the activity at time of sighting (e.g., vibratory installation/removal, impact pile driving, construction survey), use of any noise attenuation device(s), and specific phase of activity (e.g., ramp-up of HRG equipment, HRG acoustic source on/off, soft-start for pile driving, active pile driving, etc.); the marine mammal occurrence in Level A harassment or Level B harassment zones; the description of any mitigation-related action implemented, or mitigation-related actions called for but not implemented, in response to the sighting (e.g., delay, shutdown, etc.) and time and location of the action; and other human activity in the area, and; other applicable information, as required in any LOA issued under the final rule;(4) If a marine mammal is acoustically detected during PAM monitoring, the following information must be recorded and reported to NMFS Office of Protected Resources: Location of hydrophone (latitude & longitude; in Decimal Degrees) and site name; bottom depth and depth of recording unit (in meters); recorder (model & manufacturer) and platform type (i.e., bottom-mounted, electric glider, etc.), and instrument ID of the hydrophone and recording platform (if applicable); time zone for sound files and recorded date/times in data and metadata (in relation to Universal Coordinated Time (UTC); i.e., Eastern Standard Time (EST) time zone is UTC-5); duration of recordings (start/end dates and times; in International Organization for Standardization (ISO) 8601 format, yyyy-mm-ddTHH:MM:SS.sssZ); deployment/retrieval dates and times (in ISO 8601 format); recording schedule (must be continuous); hydrophone and recorder sensitivity (in dB re 1 microPascal ([MICRO]Pa)); calibration curve for each recorder; bandwidth/sampling rate (in Hz); sample bit-rate of recordings; and, detection range of equipment for relevant frequency bands (in meters);(5) For each detection, the following information must be noted:(i) Species identification (if possible); call type and number of calls (if known); temporal aspects of vocalization (date, time, duration, etc.; date times in ISO 8601 format); confidence of detection (detected, or possibly detected); comparison with any concurrent visual sightings; location and/or directionality of call (if determined) relative to acoustic recorder or construction activities; location of recorder and construction activities at time of call; name and version of detection or sound analysis software used, with protocol reference; minimum and maximum frequencies viewed/monitored/used in detection (in Hz); and name of PAM operator(s) on duty.(6) LOA Holder must compile and submit weekly reports to NMFS Office of Protected Resources that document the daily start and stop of all pile driving, drilling, UXO/MEC detonations, and HRG survey associated with the Project; the foundation/pile ID, type of pile, pile diameter, start and finish time of each drilling and pile driving event, hammer log (number of strikes, max hammer energy, duration of piling) per pile, any changes to noise attenuation systems and/or hammer schedule, the start and stop of associated observation periods by PSOs and PAM operators; details on the deployment of PSOs and PAM operators; a record of all detections of marine mammals (acoustic and visual) including time (UTC) of sighting/detection, species ID, behavior, distance (meters) from vessel to animal at time of sighting/detection (meters), animal distance (meters) from pile installation vessel and UXO/MEC detonation site, vessel/project activity at time of sighting/detection, platform/vessel name, and mitigation measures taken (if any) and reason. Sightings/detections during pile driving, drilling, and UXO/MEC activities (clearance, active pile driving and drilling, post-pile driving and drilling and detonation) and all other (transit, opportunistic, etc.) sightings/detection must be reported and identified as such; any mitigation actions (or if mitigation actions could not be taken, provide reasons why); and details on the noise attenuation system(s) used and its performance. Weekly reports are due on Wednesday for the previous week (Sunday-Saturday), can consist of Quality Assurance/Quality Compliance (QA/QC) reviewed data, and must include the information required under this section. The weekly report must also identify which turbines become operational and when (a map must be provided). This weekly report must also identify when, what charge weight size, and where UXO/MECs are detonated (a map must also be provided). The weekly reports must also confirm that the required SFV was carried out for each pile and UXO/MEC detonation and that results were reviewed on the required timelines. Abbreviated SFV reports must be appended to the weekly report. Once all foundation pile installation and UXO/MEC detonations are completed, weekly reports are no longer required by LOA Holder;(7) LOA Holder must compile and submit monthly reports to NMFS Office of Protected Resources that include a summary of all information in the weekly reports, including project activities carried out in the previous month, including dates and location of any fisheries surveys carried out, vessel transits (number, type of vessel, MMIS number, number of transits, vessel activity, and route (origin and destination, including transits from all ports, foreign and domestic)), cable installation activities (including sea to shore transition),number of piles installed and pile IDs, UXO/MEC detonation, all detections of marine mammals (sightings/detections must include species ID, time, date, initial detection distance, vessel/platform name, vessel activity, vessel speed, bearing to animal, project activity), and any mitigative action taken (or if mitigation actions could not be taken, provide reasons why). Monthly reports are due on the 15th of the month for the previous month. The monthly report must also identify which turbines become operational and when (a map must be provided). This weekly report must also identify when, what charge weight size, and where UXO/MECs are detonated (a map must also be provided);(8) LOA Holder must submit a draft annual report to NMFS Office of Protected Resources no later than 90 days following the end of a given calendar year. LOA Holder must provide a final report within 30 days following resolution of NMFS's comments on the draft report. The draft and final reports must detail the following:(i) A summary of all activities conducted, the dates and locations of all fisheries surveys, including location and duration for all trawl surveys summarized by month, number of vessel transits inclusive of port of origin and destination, and a summary table of any observations and captures of Endangered Species Act (ESA) listed species during these surveys. The report must also summarize all acoustic telemetry and benthic monitoring activities that occurred, inclusive of vessel transits. Each annual report is due by February 15 (e.g., the report for 2024 activities is due by February 15, 2025). The total number of marine mammals of each species/stock detected and how many were within the designated Level A harassment and Level B harassment zone(s) with comparison to authorized take of marine mammals for the associated activity type; marine mammal detections and behavioral observations before, during, and after each activity; what mitigation measures were implemented (i.e., number of shutdowns or clearance zone delays, etc.) or, if no mitigative actions was taken, why not; operational details (i.e., days and duration of impact and vibratory pile driving, days and duration of drilling, days and number of UXO/MEC detonations, days and amount of HRG survey effort, etc.); any PAM systems used; The results, effectiveness, and which noise attenuation systems were used during relevant activities (i.e., impact and vibratory pile driving, drilling, and UXO/MEC detonations); summarized information related to situational reporting; and any other important information relevant to the Project, including additional information that may be identified through the adaptive management process. The final annual report must be prepared and submitted within 30 calendar days following the receipt of any comments from NMFS Office of Protected Resources on the draft report. If no comments are received from NMFS Office of Protected Resources within 60 calendar days of NMFS Office of Protected Resources' receipt of the draft report, the report must be considered final.(9) LOA Holder must submit its draft final report to NMFS Office of Protected Resources on all visual and acoustic monitoring conducted within 90 calendar days of the completion of the specified activities. A 5-year report must be prepared and submitted within 60 calendar days following receipt of any NMFS Office of Protected Resources comments on the draft report. If no comments are received from NMFS Office of Protected Resources within 60 calendar days of NMFS Office of Protected Resources receipt of the draft report, the report shall be considered final. The draft and final 5-year report must include, but is not limited to: the total number (annually and across all 5 years) of marine mammals of each species/stock detected and how many were detected within the designated Level A harassment and Level B harassment zone(s) with comparison to authorized take of marine mammals for the associated activity; a summary table(s) indicating the amount of each activity type (e.g., pile installation, UXO/MEC detonations, HRG) completed in each of the 5 years and total; Geographic Information System (GIS) shapefile(s) of the final location of all piles, cable routes, and other permanent structures including an indication of what year installed and began operating; GIS shapefile of all North Atlantic right whale sightings, including dates and group sizes; a 5-year summary and evaluation of all SFV data collected; a 5-year summary and evaluation of all PAM data collected; a 5-year summary and evaluation of marine mammal behavioral observations; a 5-year summary and evaluation of mitigation and monitoring implementation and effectiveness; and a list of recommendations to inform environmental compliance assessments for future offshore wind actions;(10) LOA Holder must submit a SFV plan at least 180 days prior to the planned start of vibratory and impact pile driving, drilling, and UXO/MEC detonations. The plan must detail all plans and procedures for noise attenuation, including procedures for adjusting and optimizing the noise attenuation system(s), maintenance procedures and timelines, and detail the available contingency noise attenuation measures/systems if distances to modeled isopleths of concern are exceeded (as documented during SFV). At minimum, the plan must describe how LOA Holder would ensure that the first three monopile and two jacket (using pin piles) foundation installation sites selected for SFV are representative of the rest of the monopile and pin pile installation sites. LOA Holder must provide justification for why these locations are representative of the scenario modeled. The plan must describe how LOA Holder will conduct the required Abbreviated SFV, inclusive of requirements to review results within 24 hours and triggers for Thorough SFV. The plan must provide a table of the identification number and coordinates of each foundation location, and specify the underwater acoustics analysis model scenario against which each foundation location's SFV results will be compared. The plan(s) must also include the piling schedule and sequence of events, communication and reporting protocols, and methodology for collecting, analyzing, and preparing SFV data for submission to NMFS, including instrument deployment, locations of all hydrophones (including direction and distance from the pile), hydrophone sensitivity, recorder/measurement layout, and analysis methods. The plan must also identify the number and distance of relative location of hydrophones for Thorough and Abbreviated SFV. The plan must include a template of the interim report to be submitted and describe all the information that will be reported in the SFV Interim Reports including the number, location, depth, distance, and predicted and actual isopleth distances that will be included in the final report(s). The plan must describe how the interim SFV report results will be evaluated against the modeled results, including which modeled scenario the results will be reported against, and include a decision tree of what happens if measured values exceed predicted values. The plan must address how LOA Holder will implement the measures associated with the required SFV which includes, but is not limited to, identifying additional or modified noise attenuation measures (e.g., additional noise attenuation device, adjust hammer operations, adjust or modify the noise mitigation system) that will be applied to reduce sound levels if measured distances are greater than those modeled as well as implementation of any expanded clearance or shutdown zones, including deployment of additional PSOs. In the case that these sites/scenarios are not determined to be representative of all other monopile/pin pile installation sites, LOA Holder must include information on how additional sites/scenarios would be selected for SFV. The plan must also include methodology for collecting, analyzing, and preparing SFV data for submission to NMFS Office of Protected Resources. The plan must describe how the effectiveness of the noise attenuation methodology would be evaluated based on the results.(i) LOA Holder must also provide, as soon as they are available but no later than 48 hours after each installation, the initial results of the SFV measurements to NMFS Office of Protected Resources in an interim report after each monopile for the first three piles, after two jacket foundation using pin piles are installed, and after each UXO/MEC detonation; The plan must describe how LOA Holder will conduct the required Thorough SFV for all planned UXO/MEC detonations. Thorough SFV consists of: SFV measurements made at a minimum of four distances from the detonation, along a single transect, in the direction of lowest transmission loss (i.e., projected lowest transmission loss coefficient), including, but not limited to, 750 m and three additional ranges selected such that measurement of identified isopleths are accurate, feasible, and avoid extrapolation. At least one additional measurement at an azimuth 90 degrees from the array at approximately 750 m must be made. At each location, there must be a near bottom and mid-water column hydrophone (measurement systems). The plan must describe how the interim SFV report results will be evaluated against the modeled results and decision tree of what happens if measured values exceed predicted values. The plan must address how LOA Holder will implement the measures associated with the required SFV which includes, but is not limited to, identifying additional or modified noise attenuation measures (e.g., additional noise attenuation device, adjust hammer operations, adjust or modify the noise mitigation system) that will be applied to reduce sound levels if measured distances are greater than those modeled as well as implementation of any expanded clearance or shutdown zones, including deployment of additional PSOs;(ii) The interim report must include data from hydrophones identified for interim reporting in the SFV Plan and include a summary of pile installation activities (pile diameter, pile weight, pile length, water depth, sediment type, hammer type, total strikes, total installation time (start time, end time), duration of pile driving, max single strike energy, NAS deployments), pile location, recorder locations, modeled and measured distances to thresholds, received levels (rms, peak, and sound exposure level (SEL)) results from Conductivity, Temperature, and Depth (CTD) casts/sound velocity profiles, signal and kurtosis rise times, pile driving plots, activity logs, weather conditions. Additionally, any important noise attenuation device malfunctions (suspected or definite), must be summarized and substantiated with data (e.g. photos, positions, environmental data, directions, etc.). Such malfunctions include gaps in the bubble curtain, significant drifting of the bubble curtain, and any other issues which may indicate sub-optimal mitigation performance or are used by LOA Holder to explain performance issues;(iii) The SFV plan must also include how operational noise would be monitored. LOA Holder must estimate source levels (at 10 m from the operating foundation) based on received levels measured at distances described in a NMFS-approved SFV plan for operations. These data must be used to identify estimated transmission loss rates. Operational parameters (e.g., direct drive/gearbox information, turbine rotation rate) as well as sea state conditions and information on nearby anthropogenic activities (e.g., vessels transiting or operating in the area) must be reported;(iv) For those foundations and UXO/MEC detonations requiring Thorough SFV measurements, LOA Holder must provide the initial results of the SFV measurements to NMFS Office of Protected Resources in an interim report after each foundation installation event as soon as they are available and prior to any subsequent foundation installation, but no later than 48 hours after each completed foundation installation event. The report must include hammer energies/schedule used during pile driving or UXO/MEC weight (including donor charge weight), the model-estimated acoustic ranges (R95%) to compare with the real-world sound field measurements, estimated source levels at 1 m and/or 10 m, peak sound pressure level (SPLpk) and median, mean, maximum, and minimum root-mean-square sound pressure level that contains 90 percent of the acoustic energy (SPLrms) and sound exposure level (SEL, in single strike for pile driving (SELs-s) and SELcum) for each hydrophone, including at least the maximum, arithmetic mean, minimum, median (L50) and L5 (95 percent exceedance) statistics for each metric; estimated marine mammal Level A harassment and Level B harassment acoustic isopleths, calculated using the maximum-over-depth L5 (95 percent exceedance level, maximum of both hydrophones) of the associated sound metric; comparison of modeled results assuming 10-dB attenuation against the measured marine mammal Level A harassment and Level B harassment acoustic isopleths; estimated transmission loss coefficients; pile identifier name, location of the pile and each hydrophone array in latitude/longitude; depths of each hydrophone; one-third-octave band single strike SEL spectra; if filtering is applied, full filter characteristics must be reported; and hydrophone specifications including the type, model, and sensitivity. LOA Holder must also report any immediate observations which are suspected to have a significant impact on the results including but not limited to: observed noise mitigation system issues, obstructions along the measurement transect, and technical issues with hydrophones or recording devices. If any in situ calibration checks for hydrophones reveal a calibration drift greater than 0.75 dB, pistonphone calibration checks are inconclusive, or calibration checks are otherwise not effectively performed, LOA Holder must indicate full details of the calibration procedure, results, and any associated issues in the 48-hour interim reports;(v) All results from Abbreviated SFV must be included in the weekly reports. The report must include estimated source levels at 1 m or 10 m and the measured SELcum noise levels at distance. Any indications that distances to the identified Level A harassment and Level B harassment thresholds for marine mammals were exceeded must be addressed by LOA Holder, including an explanation of factors that contributed to the exceedance and corrective actions that were taken to avoid exceedance on subsequent piles;(vi) The final results of all SFV measurements from each foundation installation and UXO/MEC detonations must be submitted as soon as possible, but no later than within 90 days following completion of each event's SFV measurements. The final results of Thorough SFV for UXO/MEC detonations must be submitted as soon as possible, but no later than within 90 days following completion of each UXO/MEC detonation. Within 60 days of the end of each construction season, LOA Holder must compile and submit all final Abbreviated SFV reports. The final reports must include all details included in the interim report and descriptions of any notable occurrences, explanations for results that were not anticipated, or actions taken during foundation installation. The final report must also include at least the maximum, mean, minimum, median (L50) and L5 (95 percent exceedance) statistics for each metric; the SEL and SPL power spectral density and/or one-third octave band levels (usually calculated as decidecade band levels) at the receiver locations should be reported; range of transmission loss coefficients; the local environmental conditions, such as wind speed, transmission loss data collected on-site (or the sound velocity profile); baseline pre- and post-activity ambient sound levels (broadband and/or within frequencies of concern); a description of depth and sediment type, as documented in the Construction and Operation Plan (COP), at the recording and foundation installation and UXO/MEC detonation locations; the extents of the measured Level A harassment and Level B harassment zone(s); hammer energies required for pile installation and the number of strikes per pile; and charge weights and other relevant characteristics of UXO/MEC detonations; the hydrophone equipment and methods (i.e., recording device, bandwidth/sampling rate, distance from the monopile/pin pile and/or UXO/MEC where recordings were made; depth of recording device(s)); a description of the SFV measurement hardware and software, including software version used, calibration data, bandwidth capability and sensitivity of hydrophone(s), any filters used in hardware or software, any limitations with the equipment, and other relevant information; the spatial configuration of the noise attenuation device(s) relative to the pile and/or UXO/MEC charge; a description of the noise abatement system and operational parameters (e.g., bubble flow rate, distance deployed from the pile and/or UXO/MEC, etc.) and any action taken to adjust the noise abatement system. A discussion which includes any observations which are suspected to have a significant impact on the results including but not limited to: observed noise mitigation system issues, obstructions along the measurement transect, and technical issues with hydrophones or recording devices. LOA Holder must submit a revised report within 30 days following receipt of NMFS' comments on the draft final report;(vii) LOA Holder must submit SFV results from UXO/MEC detonation monitoring in a report prior to detonating a subsequent UXO/MEC or within the relevant weekly report, whichever comes first. The report must include, at minimum, the size of UXO/MEC detonated and donor charge weight, why detonation was necessary, current speeds, SELcum, a description of the noise abatement system and operational parameters (e.g., bubble flow rate, distance deployed from the detonation, etc.) and any action taken to adjust the noise abatement system, modeled and SFV-based estimated ranges to all relevant NMFS explosive thresholds (including those from pressure transducer measurements); and(viii) If at any time during the project LOA Holder becomes aware of any issue or issues which may (to any reasonable subject-matter expert, including the persons performing the measurements and analysis) call into question the validity of any measured Level A harassment or Level B harassment isopleths to a significant degree, which were previously transmitted or communicated to NMFS Office of Protected Resources, LOA Holder must inform NMFS Office of Protected Resources within 1 business day of becoming aware of this issue or before the next pile is driven, whichever comes first.(11) If a North Atlantic right whale is acoustically detected at any time by a project-related PAM system, LOA Holder must ensure the detection is reported as soon as possible to NMFS, but no longer than 24 hours after the detection via the 24-hour North Atlantic right whale Detection Template (https://www.fisheries.noaa.gov/resource/document/passive-acoustic-reporting-system-templates). Calling the hotline is not necessary when reporting PAM detections via the template. Full detection data, metadata, and location of recorders (or GPS tracks, if applicable) from all real-time hydrophones used for monitoring during construction must be submitted within 90 calendar days following completion of activities requiring PAM for mitigation via the ISO standard metadata forms available on the NMFS Passive Acoustic Reporting System website (https://www.fisheries.noaa.gov/resource/document/passive-acoustic-reporting-system-templates). Submit the completed data templates to nmfs.nec.pacmdata@noaa.gov. The full acoustic recordings from real-time systems must also be sent to the NCEI for archiving within 90 days following completion of activities requiring PAM for mitigation. Submission details can be found at: https://www.ncei.noaa.gov/products/passive-acoustic-data;(12) LOA Holder must submit situational reports if the following circumstances occur, including all instances wherein an exemption is taken must be reported to NMFS Office of Protected Resources within 24 hours, in specific circumstances, including but not limited to the following:(i) All sightings of North Atlantic right whale must be reported immediately (no later than 24 hours). If a North Atlantic right whale is sighted with no visible injuries or entanglement at any time by project PSOs or project personnel, LOA Holder must immediately report the sighting to NMFS. If immediate reporting is not possible, the report must be submitted as soon as possible but no later than 24 hours after the initial sighting. All North Atlantic right whale acoustic detections within a 24-hour period should be collated into one spreadsheet and reported to NMFS as soon as possible but no later than 24 hours.(A) To report sightings and acoustic detections, download and complete the Real-Time North Atlantic Right Whale Reporting Template spreadsheet found here: https://www.fisheries.noaa.gov/resource/document/template-datasheet-real-time-north-atlantic-right-whale-acoustic-and-visual. Save the completed spreadsheet as a .csv file and email it to NMFS Northeast Fisheries Science Center Protected Species Division (NEFSC-PSD) (ne.rw.survey@noaa.gov), NMFS GARFO Protected Species Division (PRD) (nmfs.gar.incidental-take@noaa.gov), and NMFS Office of Protected Resources (pr.itp.monitoringreports@noaa.gov). If the sighting is in the Southeast (North Carolina through Florida), report via the template and to the Southeast Hotline 877-WHALE-HELP (877-942-5343) with the observation information provided below (PAM detections are not reported to the Hotline). If unable to report a sighting through the spreadsheet within 24 hours, call the relevant regional hotline (Greater Atlantic Region [Maine through Virginia] Hotline 866-755-6622; Southeast Hotline 877-WHALE-HELP) with the observation information provided below (PAM detections are not reported to the Hotline).(B) The following information must be reported: the time (note time format), date (MM/DD/YYYY), location (latitude/longitude in decimal degrees; coordinate system used) of the observation, number of whales, animal description/certainty of observation (follow up with photos/video if taken), reporter's contact information, and lease area number/project name, PSO/personnel name who made the observation, and PSO provider company (if applicable) (PAM detections are not reported to the Hotline). If unable to report via the template or the regional hotline, enter the sighting via the WhaleAlert app (http://www.whalealert.org/). If this is not possible, report the sighting to the U.S. Coast Guard via channel 16. The report to the Coast Guard must include the same information as would be reported to the Hotline (see above). PAM detections are not reported to WhaleAlert or the U.S. Coast Guard.(C) If a large whale species is observed that is not a North Atlantic right whale, LOA Holder must report the sighting via the WhaleAlert app (http://www.whalealert.org/) as soon as possible but within 24 hours.(ii) In the event that personnel involved in the Project discover a stranded, entangled, injured, or dead marine mammal, LOA Holder must immediately report the observation to NMFS. If in the Greater Atlantic Region (Maine through Virginia), call the NMFS Greater Atlantic Stranding Hotline (866-755-6622), and if in the Southeast Region (North Carolina through Florida) call the NMFS Southeast Stranding Hotline (877-WHALE-HELP (877-942-5343)). Separately, LOA Holder must report, within 24 hours, the incident to NMFS Office of Protected Resources (PR.ITP.MonitoringReports@noaa.gov) and, if in the Greater Atlantic Region to the NMFS GARFO (nmfs.gar.incidental-take@noaa.gov) or if in the Southeast Region, to the NMFS Southeast Regional Office (SERO; secmammalreports@noaa.gov). Note, the stranding hotline may request the report be sent to the local stranding network response team. The report must include contact information (e.g., name, phone number, etc.); time, date, and location (i.e., specify coordinate system) of the first discovery (and updated location information, if known and applicable); species identification (if known) or description of the animal(s) involved; condition of the animal(s) (including carcass condition if the animal is dead); observed behaviors of the animal(s) (if alive); photographs or video footage of the animal(s) (if available); and general circumstances under which the animal was discovered.(iii) In the event of a suspected or confirmed vessel strike of a marine mammal by any vessel associated with the Project or other means by which Project activities caused a non-auditory injury or death of a marine mammal, LOA Holder must immediately report the incident to NMFS. If in the Greater Atlantic Region (Maine through Virginia), call the NMFS Greater Atlantic Stranding Hotline (866-755-6622), and if in the Southeast Region (North Carolina through Florida) call the NMFS Southeast Stranding Hotline (877-WHALE-HELP (877-942-5343)). Separately, LOA Holder must immediately report the incident to NMFS Office of Protected Resources (PR.ITP.MonitoringReports@noaa.gov) and, if in the Greater Atlantic Region to the NMFS GARFO (nmfs.gar.incidental-take@noaa.gov) or if in the Southeast Region, to the NMFS SERO ( secmammalreports@noaa.gov). The report must include time, date, and location (i.e., specify coordinate system)) of the incident; species identification (if known) or description of the animal(s) involved (i.e., identifiable features including animal color, presence of dorsal fin, body shape and size, etc.); vessel strike reporter information (name, affiliation, email for person completing the report); vessel strike witness (if different than reporter) information (e.g., name, affiliation, phone number, platform for person witnessing the event, etc.); vessel name and/or MMSI number; vessel size and motor configuration (inboard, outboard, jet propulsion); vessel's speed leading up to and during the incident; vessel's course/heading and what operations were being conducted (if applicable); part of vessel that struck marine mammal (if known); vessel damage notes; status of all sound sources in use at the time of the strike; if the marine mammal was seen before the strike event; description of behavior of the marine mammal before the strike event (if seen) and behavior immediately following the strike; description of avoidance measures/requirements that were in place at the time of the strike and what additional measures were taken, if any, to avoid strike; environmental conditions (e.g., wind speed and direction, Beaufort sea state, cloud cover, visibility, etc.) immediately preceding the strike; estimated (or actual, if known) size and length of marine mammal that was struck; if available, description of the presence and behavior of any other marine mammals immediately preceding the strike; other animal-specific details if known (e.g., length, sex, age class); behavior or estimated fate of the marine mammal post-strike (e.g., dead, injured but alive, injured and moving, external visible wounds (linear wounds, propeller wounds, non-cutting blunt-force trauma wounds), blood or tissue observed in the water, status unknown, disappeared); to the extent practicable, any photographs or video footage of the marine mammal(s); and, any additional notes the witness may have from the interaction. For any numerical values provided (i.e., location, animal length, vessel length, etc.), please provide if values are actual or estimated. LOA Holder must immediately cease activities until the NMFS Office of Protected Resources is able to review the circumstances of the incident and determine what, if any, additional measures are appropriate to ensure compliance with the terms of the LOA(s). NMFS Office of Protected Resources may impose additional measures to minimize the likelihood of further prohibited take and ensure MMPA compliance. LOA Holder must not resume their activities until notified by NMFS Office of Protected Resources.(13) LOA Holder must report any lost gear associated with the fishery surveys to the NOAA GARFO-PRD (nmfs.gar.incidental-take@noaa.gov) as soon as possible or within 24 hours of the documented time of missing or lost gear. This report must include information on any markings on the gear and any efforts undertaken or planned to recover the gear;(14) LOA Holder must provide NMFS Office of Protected Resources with notification of planned UXO/MEC detonation as soon as possible but at least 48 hours prior to the planned detonation, unless this 48-hour notification would create delays to the detonation that would result in imminent risk of human life or safety. This notification must include the coordinates of the planned detonation, the estimated charge size, and any other information available on the characteristics of the UXO/MEC. If an UXO/MEC detonation occurs, within 72 hours after a detonation but before the next detonation, whichever is sooner, LOA Holder must report to NMFS Office of Protected Resources the time, date, location (latitude/longitude Decimal Degrees), charge weight size, justification on why detonation was necessary and other means of removal or avoidance could not occur, all detections of marine mammals within the UXO/MEC zones, and any mitigative action taken; and(15) Performance reports for piles with SFV must be submitted by LOA Holder with the weekly pile driving reports. For UXO/MEC detonations, the report must be submitted as soon as it is available, but no later than when the interim SFV report is submitted for the UXO/MEC detonation.(16) Performance reports for each bubble curtain deployed must include water depth, current speed and direction, wind speed and direction, bubble curtain deployment/retrieval date and time, bubble curtain hose length, bubble curtain radius (distance from pile), diameter of holes and hole spacing, air supply hose length, compressor type (including rated Cubic Feet per Minute (CFM) and model number), number of operational compressors, performance data from each compressor (including Revolutions Per Minute (RPM), pressure, start times, and stop times), free air delivery (m3 /min), total hose air volume (m3 /(min m)), schematic of GPS waypoints during hose laying, maintenance procedures performed (pressure tests, inspections, flushing, re-drilling, and any other hose or system maintenance) before and after installation and timing of those tests, and the length of time the bubble curtain was on the seafloor prior to foundation installation. (i) The report must include any important observations regarding performance (before, during, and after pile installation or UXO/MEC detonation), such as any observed weak areas of low pressure. The report may also include any relevant video and/or photographs of the bubble curtain(s) operating during pile driving (inclusive of relief drilling) and UXO/MEC detonation.89 FR 52301, 3/27/2025 through 3/26/2030