Section 535.3 - Applicability(a) This part applies to manufacturers that produce complete and incomplete heavy-duty vehicles as defined in 49 CFR part 523, and to the manufacturers of all heavy-duty engines manufactured for use in the applicable vehicles for each given model year.(b) This part also applies to alterers, final stage manufacturers, and intermediate manufacturers producing vehicles and engines or assembling motor vehicles or motor vehicle equipment under special conditions. Manufacturers comply with this part by following the special conditions in 40 CFR 1037.620 , 1037.621 , and 1037.622 in which EPA allows manufacturer to:(1) Share responsibility for the vehicles they produce. Manufacturers sharing responsibility for complying with emissions and fuel consumption standards must submit to the agencies a joint agreement as specified in 49 CFR 534.8(a) ;(2) Have certificate holders sell or ship vehicles that are missing certain emission-related components to be installed by secondary vehicle manufacturers;(3) Ship partially complete vehicles to secondary manufacturers;(4) Build electric vehicles; and(5) Build alternative fueled vehicles from all types of heavy duty engine conversions. The conversion manufacturer must:(i) Install alternative fuel conversion systems into vehicles acquired from vehicle manufacturers prior to first retail sale or prior to the vehicle's introduction into interstate commerce.(ii) Be designated by the vehicle manufacturer and EPA to be the certificate holder.(iii) Omit alternative fueled vehicles from compliance with vehicle fuel consumption standards, if- (A) Excluded from EPA emissions standards; and(B) A reasonable technical basis exist that the modified vehicle continues to meet emissions and fuel consumption vehicle standards.(c) Vehicle and engine manufacturers that must comply with this part include manufacturers required to have approved certificates of conformity from EPA as specified in subparts C in 40 CFR parts 1036 and 1037.(d) The following heavy-duty vehicles and engines are excluded from the requirements of this part:(1) Vehicles and engines manufactured prior to January 1, 2014, unless certified early under NHTSA's voluntary provisions in § 535.5 .(2) Medium-duty passenger vehicles and other vehicles subject to the light-duty corporate average fuel economy standards in 49 CFR parts 531 and 533.(3) Recreational vehicles, including motor homes manufactured before January 1, 2021, except those produced by manufacturers voluntarily complying with NHTSA's early vocational standards for model years 2013 through 2020.(4) Aircraft vehicles meeting the definition of "motor vehicle". For example, this would include certain convertible aircraft that can be adjusted to operate on public roads.(6) Engines installed in heavy-duty vehicles that are not used to propel vehicles. Note, this includes engines used to indirectly propel vehicles (such as electrical generator engines that power to batteries for propulsion).(7) The provisions of this part do not apply to engines that are not internal combustion engines. For example, the provisions of this part do not apply to fuel cells. Note that gas turbine engines are internal combustion engines.(e) The following heavy-duty vehicles and engines are exempted from the requirements of this part: (1)Off-road vehicles. Vocational vehicles intended for off-road use are exempt with or without request, subject to the provisions of § 535.5(b)(9) .(2)Small business manufacturers.(i) For Phase 1, small business manufacturers are exempted from the vehicle and engine standards of § 535.5 but must comply with the reporting requirements of § 535.8(g) .(ii) For Phase 2, fuel consumption standards apply on a delayed schedule for manufacturers meeting the small business criteria specified in 13 CFR 121.201 and in 40 CFR 86.1819-14(k)(5), 1036.150 , and 1037.150 . (A) Qualifying manufacturers of truck tractors, vocational vehicles, heavy duty pickups and vans, and engines are not subject to the fuel consumption standards for vehicles built before January 1, 2022, and engines (such as those engines built by small alternative fuel engine converters) with a date of manufacturer on or after November 14, 2011, and before January 1, 2022. Qualifying manufacturers may choose to voluntarily comply early.(B) Small manufacturers that certify their entire U.S.-directed production volume to the Phase 1 standards for calendar year 2021 may certify to the Phase 1 standards for model year 2022 (instead of the otherwise applicable Phase 2 standards).(iii) Small business manufacturers producing vehicles and engines that run on any fuel other than gasoline, E85, or diesel fuel meeting the criteria specified in 13 CFR 121.201 and in 40 CFR 86.1819-14(k)(5), 1036.150 , and 1037.150 may delay complying with every new mandatory standard under this part by one model year.(4)Engines for specialty vehicles. Engines certified to the alternative standards specified in 40 CFR 86.007-11 and 86.008-10 for use in specialty vehicles as described in 40 CFR 1037.605 . Compliance with the vehicle provisions in 40 CFR 1037.605 satisfies compliance for NHTSA under this part.(f) For model year 2021 and later, vocational vehicle manufacturers building custom chassis vehicles (e.g. emergency vehicles) may be exempted from standards in § 535.5(b)(4) and may comply with alternative fuel consumption standards as specified in § 535.5(b)(6) . Manufacturers complying with alternative fuel consumption standards in § 535.5(b)(6) are restricted in using fuel consumption credits as specified in § 535.7(c) .(g) The fuel consumption standards in some cases apply differently for spark-ignition and compression-ignition engines or vehicles as specified in 40 CFR parts 1036 and 1037. Engine requirements are similarly differentiated by engine type and by primary intended service class, as described in 40 CFR 1036.140 .(h) NHTSA may exclude or exempt vehicles and engines under special conditions allowed by EPA in accordance with 40 CFR parts 85, 86, 1036, 1037, 1039, and 1068. Manufacturers should consult the agencies if uncertain how to apply any EPA provision under the NHTSA fuel consumption program. It is recommend that manufacturers seek clarification before producing a vehicle. Upon notification by EPA of a fraudulent use of an exemption, NHTSA reserves that right to suspend or revoke any exemption or exclusion.(i) In cases where there are differences between the application of this part and the corresponding EPA program regarding whether a vehicle is regulated or not (such as due to differences in applicability resulting from differing agency definitions, etc.), manufacturers should contact the agencies to identify these vehicles and assess the applicability of the agencies' standards. The agencies will provide guidance on how the vehicles can comply. Manufacturers are required to identify these vehicles in their final reports submitted in accordance with § 535.8 . 81 FR 74238 , Oct. 25, 2016, as amended at 89 FR 18819 , Mar. 15, 2024 81 FR 74238 , 12/27/2016; 89 FR 18819 , 5/14/2024