49 C.F.R. § 223.15

Current through November 30, 2024
Section 223.15 - Requirements for passenger cars built or rebuilt prior to July 1, 1980
(a) Passenger cars built or rebuilt prior to July 1, 1980, which are equipped in the forward and rearward end facing glazing locations of the windshield with a glazing material that meets the criteria for either portion of the impact testing required for a Type I test under the provisions of appendix A of this part will not require the installation of certified glazing in the windshield location except to replace windshield glazing material that is broken or damaged.
(b) Passenger cars built or rebuilt prior to July 1, 1980, which are equipped in the sidefacing glazing locations with a glazing material that meets the criteria for either portion of the impact testing required for a Type II test under the provisions of appendix A of this part, will not require the installation of certified glazing except to replace sidefacing glazing material that is broken or damaged.
(c) Except for passenger cars described in paragraphs (a) and (b) of this section, passenger cars built or rebuilt prior to July 1, 1980, shall be equipped with certified glazing in all windows and a minimum of four emergency windows.
(d) Each passenger car that has a window that is broken or damaged so that the window fails to permit good visibility shall be removed from service until the broken or damaged window is replaced with certified glazing.

49 C.F.R. §223.15

44 FR 77352, Dec. 31, 1979, as amended at 48 FR 24083, May 31, 1983; 48 FR 56956, Dec. 27, 1983; 81 FR 6790 , Feb. 9, 2016; 87 FR 68925 , Nov. 17, 2022

Sec. 209 of the Federal Railroad Safety Act, 94 Stat. 957 ( 45 U.S.C. 438 ); sec. 1.49(m) of the regulations of the Office of the Secretary of Transportation, 49 CFR 1.49(m)

81 FR 6790 , 2/9/2016; 87 FR 68925 , 11/17/2022