In addition to § 179.200 , the individual specification requirements are as follows:
DOT Specification1 | Insulation | Bursting pressure (psig) | Minimum plate thickness (inches) | Test pressure (psig) | Bottom outlet | Bottom washout | References (179.201 - ***) |
111A60ALW1 | Optional | 240 | 1/2 | 60 | Optional | Optional | 6(a). |
111A60ALW2 | Optional | 240 | 1/2 | 60 | No | Optional. | |
111A60W1 | Optional | 240 | 7/16 | 60 | Optional | Optional | 6(a). |
111A60W2 | Optional | 240 | 7/16 | 60 | No | Optional. | |
111A60W5 | Optional | 240 | 7/16 | 60 | No | No | 3, 6(b). |
111A60W6 | Optional | 240 | 7/16 | 60 | Optional | Optional | 4, 5, 6(a), 6(c). |
111A60W7 | Optional | 240 | 7/16 | 60 | No | No | 4, 5, 6(a). |
111A100ALW1 | Optional | 500 | 5/8 | 100 | Optional | Optional | 6(a). |
111A100ALW2 | Optional | 500 | 5/8 | 100 | No | Optional. | |
111A100W1 | Optional | 500 | 7/16 | 100 | Optional | Optional | 6(a). |
111A100W2 | Optional | 500 | 7/16 | 100 | No | Optional. | |
111A100W3 | Yes | 500 | 7/16 | 100 | Optional | Optional | 6(a). |
111A100W4 | Yes (see 179.201-11) | 500 | 7/16 | 100 | No | No | 6(a), 8, 10. |
111A100W5 | Optional | 500 | 7/16 | 100 | No | No | 3. |
111A100W6 | Optional | 500 | 7/16 | 100 | Optional | Optional | 4, 5, 6(a) and 6(c). |
111A100W7 | Optional | 500 | 7/16 | 100 | No | No | 4, 5, 6(c). |
1 Tanks marked "ALW" are constructed from aluminum alloy plate; "AN" nickel plate; "CW," "DW," "EW," "W6," and "W7" high alloy steel or manganese-molybdenum steel plate; and those marked "BW" or "W5" must have an interior lining that conforms to § 179.201-3 .
49 C.F.R. §§179.201-1