Section 2.906 - Supplier's Declaration of Conformity(a) Supplier's Declaration of Conformity (SDoC) is a procedure where the responsible party, as defined in § 2.909 , makes measurements or completes other procedures found acceptable to the Commission to ensure that the equipment complies with the appropriate technical standards and other applicable requirements. Submittal to the Commission of a sample unit or representative data demonstrating compliance is not required unless specifically requested pursuant to § 2.945 .(b) Supplier's Declaration of Conformity is applicable to all items subsequently marketed by the manufacturer, importer, or the responsible party that are identical, as defined in § 2.908 , to the sample tested and found acceptable by the manufacturer.(c) The responsible party may, if it desires, apply for Certification of a device subject to the Supplier's Declaration of Conformity. In such cases, all rules governing certification will apply to that device.(d) Notwithstanding other parts of this section, equipment otherwise subject to the Supplier's Declaration of Conformity process that is produced by any entity identified on the Covered List, established pursuant to § 1.50002 of this chapter, as producing covered communications equipment is prohibited from obtaining equipment authorization through that process. The rules governing certification apply to authorization of such equipment. 82 FR 50825 , Nov. 2, 2017, as amended at 88 FR 7623 , Feb. 6, 2023 82 FR 50825, 11/2/2017; as amended at 88 FR 7623, 2/6/2023