Section 2.932 - Modification of equipment(a) A new application for an equipment authorization shall be filed whenever there is a change in the design, circuitry or construction of an equipment or device for which an equipment authorization has been issued, except as provided in paragraphs (b) through (d) of this section.(b) Permissive changes may be made in certificated equipment, and equipment that was authorized under the former type acceptance procedure, pursuant to § 2.1043 .(c) Permissive changes may be made in equipment that was authorized under the former notification procedure without submittal of information to the Commission, unless the equipment is currently subject to authorization under the certification procedure. However, the grantee shall submit information documenting continued compliance with the pertinent requirements upon request.(d) All requests for permissive changes must be accompanied by the anti-drug abuse certification required under § 1.2002 of this chapter.(e) All requests for permissive changes shall be accompanied by: (1) A written and signed certification that, as of the date of the filing of the request for permissive change, the equipment to which the change applies is not prohibited from receiving an equipment authorization pursuant to § 2.903 ;(2) An affirmative or negative statement as to whether the applicant is identified on the Covered List, established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment; and(3) The written and signed certifications required under § 2.911(d)(7) .63 FR 36598, July 7, 1998, as amended at 66 FR 50840 , Oct. 5, 2001; 70 FR 23039 , May 4, 2005; 80 FR 33441 , June 12, 2015; 88 FR 7624 , Feb. 6, 2023