Section 15.38 - [Effective 11/18/2024] Incorporation by referenceCertain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . To enforce any edition other than that specified in this section, the Federal Communications Commission (FCC) must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at the FCC and at the National Archives and Records Administration (NARA). Contact FCC at the address indicated in 47 CFR 0.401(a) ; phone: (202) 418-0270. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov. The material may be obtained from the following sources:
(a) The IBR material may be obtained from the sources in the following paragraphs of this section or from one or more private resellers listed in this paragraph (a). (1) Accuris Standards Store, 321 Inverness Drive, South Englewood, CO 80112; phone: (800) 332-6077; website: https://accuristech.com.(2) American National Standards Institute (ANSI), see paragraph (b) of this section.(4) Nimonik Document Center, 401 Roland Way, Suite 224, Oakland, CA 94624; phone (650) 591-7600; email: info@document-center.com; website: www.document-center.com.(b) American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, NY 10036; phone: (212) 642-4980; email info@ansi.org; website: https://webstore.ansi.org/.(1) ANSI C63.17-2013, American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices, approved August 12, 2013; IBR approved for § 15.31 .(2) Third Edition of the International Special Committee on Radio Interference (CISPR), Pub. 22, Information Technology Equipment-Radio Disturbance Characteristics-Limits and Methods of Measurement, 1997; IBR approved for § 15.09.(c) Cable Television Laboratories, Inc., 858 Coal Creek Circle, Louisville, Colorado 80027; phone: (303) 661-9100; website: www.cablelabs.com/.(1) M-UDCP-PICS-I04-080225, Uni-Directional Cable Product Supporting M-Card: Multiple Profiles; Conformance Checklist: PICS, February 25, 2008; IBR approved for § 15.123(c) .(2) TP-ATP-M-UDCP-I05-20080304, Uni-Directional Digital Cable Products Supporting M-Card; M-UDCP Device Acceptance Test Plan, March 4, 2008; IBR approved for § 15.123(c) .(d) Consumer Technology Association (formerly Consumer Electronics Association), 1919 S. Eads St., Arlington, VA 22202; phone: (703) 907-7634; email: CTA@CTA.tech; website: www.cta.tech/. (1) CEA-542-B, CEA Standard: Cable Television Channel Identification Plan, July 2003; IBR approved for § 15.118 .(2) CEA-766-A, U.S. and Canadian Region Rating Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information using ATSC A/65-A Program and System Information Protocol (PSIP), April 2001; IBR approved for § 15.120 .(3) EIA-608, Recommended Practice for Line 21 Data Service, 1994; IBR approved for § 15.120 .(4) EIA-744, Transport of Content Advisory Information Using Extended Data Service (XDS), 1997; IBR approved for § 15.120 .(5) Uni-Dir-PICS-I01-030903, Uni-Directional Receiving Device: Conformance Checklist: PICS Proforma, September 3, 2003; IBR approved for § 15.123(c) .(6) Uni-Dir-ATP-I02-040225, Uni-Directional Receiving Device, Acceptance Test Plan, February 25, 2004; IBR approved for § 15.123(c) .(e) European Telecommunications Standards Institute (ETSI), 650 Route des Lucioles, F-06921 Sophia Antipolis Cedex, France; phone: +33 4 92 94 42 00; email: webstore@etsi.org; website: www.etsi.org/.(f) Institute of Electrical and Electronic Engineers (IEEE), 3916 Ranchero Drive, Ann Arbor, MI 48108; phone: (800) 678-4333; email: stds-info@ieee.org; website: www.ieee.org/.(1) ANSI C63.4-2014: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz, ANSI approved June 13, 2014; IBR approved for § 15.35(a) .(2) ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz, ANSI approved June 13, 2014 (excluding clauses 4.5.3, 4.6, 6.2.13, 8.2.2, 9, and 13); IBR approved for § 15.31(a) .(3) ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices, ANSI approved June 27, 2013; IBR approved for §§ 15.31(a) ; 15.37(s) .(4) ANSI C63.10-2020, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices, ANSI-approved September 10, 2020; IBR approved for §§ 15.31(a) ; 15.37(s) .(g) Society of Cable Telecommunications Engineers (SCTE), 140 Philips Rd., Exton, PA 19341; phone: (610) 363-6888; email: info@scte.org; website: www.scte.org.(1) SCTE 28 2003 (formerly DVS 295): "Host-POD Interface Standard," 2003; IBR approved for § 15.123 .(2) SCTE 40 2003 (formerly DVS 313): "Digital Cable Network Interface Standard," 2003; IBR approved for § 15.123 .(3) SCTE 41 2003 (formerly DVS 301): "POD Copy Protection System," 2003; IBR approved for § 15.123 .(4) ANSI/SCTE 54 2003 (formerly DVS 241): "Digital Video Service Multiplex and Transport System Standard for Cable Television," 2003; IBR approved for § 15.123 .(5) ANSI/SCTE 65 2002 (formerly DVS 234): "Service Information Delivered Out-of-Band for Digital Cable Television," 2002; IBR approved for § 15.123 . 88 FR 67115 , Sept. 29, 2023 82 FR 50832, 11/2/2017; 85 FR 64406, 10/13/2020; 88 FR 67115, 10/30/2023; 89 FR 83798 , 11/18/2024