Section 180.130 - Stowage of survival craft(a) Each survival craft must be:(1) Secured to the vessel by a painter with a float-free link permanently attached to the vessel except that a float-free link is not required if the vessel operates only on waters not as deep as the length of the painter;(2) Stowed so that when the vessel sinks the survival craft floats free and, if inflatable, inflates automatically;(3) Stowed in a position that is readily accessible to crew members for launching, or else provided with a remotely operated device that releases the survival craft into launching position or into the water;(4) Stowed in a way that permits manual release from its securing arrangements;(5) Ready for immediate use so that crew members can carry out preparations for embarkation and launching in less than 5 minutes;(6) Provided with means to prevent shifting;(7) Stowed in a way that neither the survival craft nor its stowage arrangements will interfere with the embarkation and operation of any other survival craft at any other launching station;(8) Stowed in a way that any protective covers will not interfere with launching and embarkation;(9) Fully equipped as required under this part; and(10) Stowed, as far as practicable, in a position sheltered from breaking seas and protected from damage by fire.(b) A hydrostatic release unit when used in a float-free arrangement must be approved under approval series 160.062 or 160.162 or other standard specified by the Commandant.(c) A mechanical, manually operated device to assist in launching a survival craft must be provided if:(1) The survival craft weights more than 90.7 kilograms (200 pounds); and(2) The survival craft requires lifting more than 300 vertical millimeters (one vertical foot) to be launched.CGD 85-080, 61 FR 975, Jan. 10, 1996, as amended at 62 FR 51357, Sept. 30, 1997; 62 FR 64306, Dec. 5, 1997