Section 160.174-3 - [Effective 10/18/2024] Incorporation by referenceCertain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51 . All approved incorporation by reference (IBR) material is available for inspection at the Coast Guard Headquarters and at the National Archives and Records Administration (NARA). Contact the Coast Guard at: Commandant (CG-ENG-4), U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; email typeapproval@uscg.mil or visit www.dco.uscg.mil/CG-ENG-4/. For information on the availability of this material at NARA, email: fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the sources in the following paragraphs of this section.
(a)ASTM International (ASTM). 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: +1 610 832 9500; email: service@astm.org; web: www.astm.org.(1) ASTM C177-85 (1993), Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus ("ASTM C 177"); IBR approved for § 160.174-17(f) and (g) .(2) ASTM C518-91, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ("ASTM C 518"); IBR approved for § 160.174-17(f) and (g) .(3) ASTM D975-14, Standard Specification for Diesel Fuel Oils, approved February 1, 2014 ("ASTM D 975"); IBR approved for § 160.174-17(g) .(4) ASTM D1004-94a, Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting ("ASTM D 1004"); IBR approved for § 160.174-47(i).(5) ASTM D1518-85 (1990), Standard Test Method for Thermal Transmittance of Textile Materials ("ASTM D 1518"); IBR approved for § 160.174-17(f) .(b)General Services Administration (GSA). email: GSAStandards@gsa.gov; web: https://fedspecs.gsa.gov/s/federal-specifications.(1) Federal Standard No. 751a, Stitches, Seams, and Stitchings, dated January 25, 1965 ("Federal Standard No. 751"); IBR approved for § 160.174-9(b) .(c)National Institution of Standards and Technology (NIST) (formerly National Bureau of Standards). U.S. Department of Commerce, National Institution of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899; phone: (301) 975-2000; web: www.nist.gov.CGD 84-069b, 51 FR 19343, May 29, 1986, as amended by CGD 95-072, 60 FR 50467, Sept. 29, 1995; CGD 96-041, 61 FR 50733, Sept. 27, 1996; CGD 97-057, 62 FR 51049, Sept. 30, 1997; USCG-1999-6216, 64 FR 53228, Oct. 1, 1999; USCG-1999-5151, 64 FR 67184, Dec. 1, 1999; USCG-2009-0702, 74 FR 49238, Sept. 25, 2009; USCG-2013-0671, 78 FR 60159, Sept. 30, 2013