Section 160.171-3 - [Effective 10/18/2024] Incorporation by referenceCertain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51 . All approved incorporation by reference (IBR) material is available for inspection at the Coast Guard Headquarters and at the National Archives and Records Administration (NARA). Contact the Coast Guard at: Commandant (CG-ENG-4), U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; email typeapproval@uscg.mil or visit www.dco.uscg.mil/CG-ENG-4/. For information on the availability of this material at NARA, visit: www.archives.gov/federal-register/cfr/ibr-locations.html or email: fr.inspection@nara.gov. The material may be obtained from the following sources:
(a)ASTM International (ASTM). 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: +1 610 832 9500; email: service@astm.org; web: www.astm.org.(1) ASTM B117-97, Standard Practice for Operating Salt Spray (Fog) Apparatus ("ASTM B117"); IBR approved for § 160.171-17(k) .(2) ASTM C177-85 (1993), Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus ("ASTM C177"); IBR approved for § 160.171-17(e) .(3) ASTM C518-91, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ("ASTM C518"); IBR approved for § 160.171-17(e) .(4) ASTM D975-14, Standard Specification for Diesel Fuel Oils, approved February 1, 2014 ("ASTM D975"); IBR approved for § 160.171-17(p) .(5) ASTM D1004-94a, Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting ("ASTM D1004"); IBR approved for § 160.171-17(n) .(b)General Services Administration (GSA). email: GSAStandards@gsa.gov; web: https://fedspecs.gsa.gov/s/federal-specifications.(1) Federal Test Method Standard No. 191a dated July 20, 1978, Method 5304.1, Abrasion Resistance of Cloth, Oscillatory Cylinder (Wyzenbeek) Method, dated July 9, 1971 ("Federal Test Method Standard 191, Method 5304.1"); IBR approved for § 160.171-17(o) .(2) Federal Standard No. 751a, Stitches, Seams, and Stitchings, dated January 25, 1965 ("Federal Standard No. 751"); IBR approved for § 160.171-9(c) .(c)National Institution of Standards and Technology (NIST) (formerly National Bureau of Standards). U.S. Department of Commerce, National Institution of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899; phone: (301) 975-2000; web: www.nist.gov.(d)Underwriters Laboratories (UL). 1850 M. St. NW, Suite 1000, Washington, DC, District of Columbia, 20036-5833; phone: (202) 296-7840; fax: (202) 872-1576; web: www.ul.com.(1) UL 1191, Standard for Components for Personal Flotation Devices, First Edition, as revised March 29, 1977; IBR approved for § 160.171-17(h) .CGD 84-069a, 52 FR 1188, Jan. 12, 1987, as amended by CGD 95-072, 60 FR 50467, Sept. 29, 1995; CGD 96-041, 61 FR 50733, Sept. 27, 1996; CGD 97-057, 62 FR 51048, Sept. 30, 1997; USCG-1999-5151, 64 FR 67184, Dec. 1, 1999; USCG-2009-0702, 74 FR 49237, Sept. 25, 2009; USCG-2013-0671, 78 FR 60159, Sept. 30, 2013