Section 160.010-5 - Buoyant apparatus with plastic foam buoyancy(a) Buoyant apparatus with plastic foam buoyancy must have a plastic foam body with an external protective covering. The body may be reinforced as necessary to meet the tests in § 160.010-7 .(b) Plastic foam used in the construction of buoyant apparatus must be a unicellular type accepted by the Commandant (CG-ENG-4) as meeting one of the following: (1) Subpart 164.015 of this chapter.(2) MIL-P-19644C (incorporated by reference, see § 160.010-1 of this subpart).(3) MIL-P-21929B (incorporated by reference, see § 160.010-1 of this subpart).(4) MIL-P-40619A (incorporated by reference, see § 160.010-1 of this subpart).(c) The external protective covering must be- (1) Fibrous-glass-reinforced plastic, constructed of a polyester resin listed on the current Qualified Products List for MIL-P-21607E(SH) (incorporated by reference, see § 160.010-1 of this subpart), or accepted by the Commandant (CG-ENG-4) as meeting MIL-P-21607;(2) Elastomeric vinyl accepted by the Commandant (CG-ENG-4) as meeting § 160.055-3(j) of this chapter; or(3) Any other material accepted by the Commandant (CG-ENG-4) as providing equivalent protection for the body of the apparatus.CGD 79-167, 47 FR 41372, Sept. 20, 1982, as amended by CGD 95-072, 60 FR 50466, Sept. 29, 1995; CGD 96-041, 61 FR 50733, Sept. 27, 1996. Redesignated by CGD 85-205, 62 FR 25545, May 9, 1997, as amended by USCG-2009-0702, 74 FR 49237 , Sept. 25, 2009; USCG-2010-0048, 76 FR 62975 , Oct. 11, 2011