Section 58.03-1 - Incorporation by referenceCertain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . To enforce any edition other than that specified in this section, the Coast Guard must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at the U.S. Coast Guard and the National Archives and Records Administration (NARA). Contact U.S. Coast Guard Headquarters at: Commandant (CG-ENG), Attn: Office of Design and Engineering Standards, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; phone (202) 372-1375; email typeapproval@uscg.mil. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov. The material may be obtained from the following sources:
(a)American Boat and Yacht Council (ABYC), 613 Third Street, Suite 10, Annapolis, MD 21403; (410) 990-4460; www.abycinc.org. (1) ABYC P-1, Installation of Exhaust Systems for Propulsion and Auxiliary Engines, reaffirmed July 2014; IBR approved for § 58.10-5(d) .(b)American Bureau of Shipping (ABS), 1701 City Plaza Drive, Spring, TX 77389; 281-877-6000; CSC@eagle.org; ww2.eagle.org. (1) ABS Rules for Building and Classing Marine Vessels, Part 4, Vessel Systems and Machinery, January 2020 ("ABS Marine Vessel Rules"); IBR approved for §§ 58.01-5 ; 58.05-1 ; 58.10-15(a) ; 58.20-5(a) ; 58.25-5(d) .(c)American Petroleum Institute (API), 200 Massachusetts Avenue NW, Washington, DC 20001-5571; 202-682-8000; APIPubs@api.org; www.api.org. (1) API Recommended Practice 14C, Analysis, Design, Installation and Testing of Safety Systems for Offshore Production Facilities, Eighth Edition, February 2017, including Errata 1 (May 2018) ("API RP 14C"); IBR approved for § 58.60-9 .(2) API Standard 53, Well Control Equipment Systems for Drilling Wells, Fifth Edition, December 2018 ("API STD 53"); IBR approved for § 58.60-7 .(d)American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016-5990; 800-843-2763; CustomerCare@asme.org; www.asme.org. (1) ASME BPVC.I-2019, 2019 ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers, 2019 Edition, issued July 1, 2019 ("Section I of the ASME BPVC"); IBR approved for § 58.30-15(b) .(2) ASME BPVC.VIII.1-2019, 2019 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels, 2019 Edition, issued July 1, 2019 ("Section VIII of the ASME BPVC"); IBR approved for § 58.30-15(b) .(3) ASME B31.3-2018, Process Piping, ASME Code for Pressure Piping, B31, issued August 30, 2019 ("ASME B31.3"); IBR approved for § 58.60-7 .(4) ASME B31.5-2016, Refrigeration Piping and Heat Transfer Components, issued June 29, 2016 ("ASME B31.5"); IBR approved for §§ 58.20-5(a) ; 58.20-20(b) .(e)ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959; 610-832-9500; service@astm.org; www.astm.org. (1) ASTM A193/A193M-19, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service or High Pressure Service and Other Special Purpose Applications, approved November 1, 2019 ("ASTM A193/A193M"); IBR approved for § 58.30-15(c) .(2) ASTM B96/B96M-16, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels, approved April 1, 2016 ("ASTM B96"); IBR approved for § 58.50-5(a) .(3) ASTM B122/B122M-16, Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar, approved April 1, 2016 ("ASTM B122"); IBR approved for § 58.50-5(a) .(4) ASTM B127-19, Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip, approved November 1, 2019 ("ASTM B127"); IBR approved for §§ 58.50-5(a) ; 58.50-10(a) .(5) ASTM B152/B152M-19, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar, approved October 1, 2019 ("ASTM B152"); IBR approved for § 58.50-5(a) .(6) ASTM B209-14, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate, approved November 1, 2014 ("ASTM B209"); IBR approved for §§ 58.50-5(a) ; 58.50-10(a) .(7) ASTM D92-18, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester, approved July 1, 2018 ("ASTM D92"); IBR approved for § 58.30-10(b) .(8) ASTM D93-19, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, approved November 1, 2019 ("ASTM D93"); IBR approved for § 58.01-10(b) .(9) ASTM D323-15a, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method), approved June 1, 2015 ("ASTM D323"); IBR approved for § 58.16-5 .(f)International Maritime Organization (IMO), Publications Section, 4 Albert Embankment, London SE1 7SR, United Kingdom; sales@imo.org; www.imo.org. (1) Resolution A.467(XII), Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight, 1981 ("IMO A.467(XII)"); IBR approved for § 58.25-60 .(2) Resolution MSC.337(91), Code on Noise Levels on Board Ships, adopted November 30, 2012 ("IMO Resolution MSC.337(91)"); IBR approved for § 58.01-50 .(3) SOLAS Consolidated Edition 2020, Consolidated text of the International Convention for the Safety of Life at Sea, 1974, and its Protocol of 1988: articles, annexes and certificates, Consolidated Edition, January 1, 2020 (SOLAS); IBR approved for § 58.25-10(a) .(g)National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169-7471; 617-770-3000; custserv@nfpa.org; www.nfpa.org. (1) NFPA 302, Fire Protection Standard for Pleasure and Commercial Motor Craft, 2020 Edition, ANSI-approved August 25, 2019 ("NFPA 302"); IBR approved for § 58.10-5(d) .(h)SAE International (SAE), 400 Commonwealth Drive, Warrendale, PA 15096; 724-776-4841; customerservice@sae.org; www.sae.org. (1) SAE J429 MAY2014, Mechanical and Material Requirements for Externally Threaded Fasteners, revised May 2014 ("SAE J429"); IBR approved for § 58.30-15(c) .(2) SAE J1928 JUN2018, Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications, revised June 2018 ("SAE J1928"); IBR approved for § 58.10-5(b) .USCG-2003-16630, 73 FR 65186 , Oct. 31, 2008, as amended by USCG-2009-0702, 74 FR 49229 , Sept. 25, 2009; USCG-2012-0832, 77 FR 59778 , Oct. 1, 2012; USCG-2013-0671, 78 FR 60148 , Sept. 30, 2013