46 C.F.R. §§ 56.25-5

Current through November 30, 2024

Section 56.25-5 - Flanges

Each flange must conform to the design requirements of either the applicable standards of table 2 to § 56.60-1 , or of those of Appendix 2 of Section VIII of the ASME BPVC (incorporated by reference; see § 56.01-2 ). Plate flanges must meet the requirements of § 56.30-10(b)(5) . Flanges may be integral or may be attached to pipe by threading, welding, brazing, or other means within the applicable standards specified in table 2 to § 56.60-1 .

46 C.F.R. §§56.25-5

CGD 77-140, 54 FR 40605, Oct. 2, 1989, as amended by USCG-2002-13058, 67 FR 61278 , Sept. 30, 2002; USCG-2003-16630, 73 FR 65176 , Oct. 31, 2008

89 FR 50131 , 9/10/2024