Section 54.10-3 - Marine inspectors and Coast Guard Symbol stamping (replaces UG-90 and UG-91, and modifies UG-92 through UG-103)(a) Only marine inspectors will apply the Coast Guard Symbol. They will not apply any other code symbol to pressure vessels.(b) All pressure vessels not exempted under provisions of § 54.01-15 must be subject to shop inspection by a marine inspector referring to procedures outlined in UG-92 through UG-103 of Section VIII of the ASME BPVC (incorporated by reference; see § 54.01-1 ) and §§ 50.30-10 , 50.30-15 , and 50.30-20 of this subchapter. The marine inspector will then stamp the vessel with the Coast Guard Symbol.(c) Pressure vessels exempted under provisions of § 54.01-15 , except as provided in paragraph (d) of this section, are not required to be stamped with the Coast Guard Symbol.(d) Pressure vessels described in § 54.01-5(c)(3) , except pressure vessels in systems regulated under subpart 58.60 of this subchapter, must be visually examined by a marine inspector prior to installation. The marine inspector also reviews the associated plans and manufacturers' data reports. If, upon inspection, the pressure vessel complies with the applicable requirements in § 54.01-5 , the marine inspector stamps the pressure vessel with the Coast Guard Symbol.CGFR 68-82, 33 FR 18828, Dec. 18, 1968, as amended by CGD 77-147, 47 FR 21810, May 20, 1982; USCG-2003-16630, 73 FR 65167, Oct. 31, 2008