Current through September 30, 2024
Section 1090.910 - Reporting for gasoline manufacturers that recertify BOB to gasolineA party that recertifies BOB under § 1090.740 must report the information of this section, as applicable.
(a)Batch reporting.(1) A party that recertifies a BOB under § 1090.740 with less oxygenate than specified by the BOB manufacturer must report the following for each batch: (i) The EPA-issued company and facility identifiers for the recertifying party.(ii) The batch number assigned by the recertifying party.(iii) The date the batch was recertified.(iv) The batch volume, as a negative number in gallons. The volume is the amount of oxygenate that the recertifying gasoline manufacturer did not blend with the BOB.(v) The designation of the batch.(vi) A sulfur content of 11 ppm.(vii) A benzene content of 0.68 volume percent.(viii) The type and content of each oxygenate, as a volume percentage.(ix) The sulfur deficit for the batch calculated under § 1090.740(b)(1) .(x) The benzene deficit for the batch calculated under § 1090.740(b)(3) .(2) A party that recertifies a BOB under § 1090.740 with more oxygenate than specified by the BOB manufacturer does not need to report the batch.(b)Annual sulfur and benzene compliance reporting. A party that recertifies a BOB under § 1090.740 must include any deficits incurred from recertification in reports under § 1090.905(a) and (b) .(c)Credit transactions. A party that recertifies a BOB under § 1090.740 must report any credit transactions under § 1090.905(d) .