40 C.F.R. § 1065.665

Current through October 31, 2024
Section 1065.665 - THCE and NMHCE determination
(a) If you measured an oxygenated hydrocarbon's mass concentration, first calculate its molar concentration in the exhaust sample stream from which the sample was taken (raw or diluted exhaust), and convert this into a C1-equivalent molar concentration. Add these C1-equivalent molar concentrations to the molar concentration of non-oxygenated total hydrocarbon (NOTHC). The result is the molar concentration of total hydrocarbon equivalent (THCE). Calculate THCE concentration using the following equations, noting that Eq. 1065.665-3 is required only if you need to convert your oxygenated hydrocarbon (OHC) concentration from mass to moles:

View Image

View Image

View Image

Where:

[XI]THCE = the sum of the C1-equivalent concentrations of non-oxygenated hydrocarbon, alcohols, and aldehydes.

[XI]NOTHC = the sum of the C1-equivalent concentrations of NOTHC.

[XI]OHCi = the C1-equivalent concentration of oxygenated species i in diluted exhaust, not corrected for initial contamination.

[XI]OHCi-init = the C1-equivalent concentration of the initial system contamination (optional) of oxygenated species i, dry-to-wet corrected.

[XI]THC[THC-FID]cor = the C1-equivalent response to NOTHC and all OHC in diluted exhaust, HC contamination and dry-to-wet corrected, as measured by the THC-FID.

RFOHCi[THC-FID] = the response factor of the FID to species i relative to propane on a C1-equivalent basis.

Mdexh = the molar mass of diluted exhaust as determine in § 1065.340 .

mdexhOHCi = the mass of oxygenated species i in dilute exhaust.

MOHCi = the C1-equivalent molecular weight of oxygenated species i.

mdexh = the mass of diluted exhaust.

ndexhOHCi = the number of moles of oxygenated species i in total diluted exhaust flow.

ndexh = the total diluted exhaust flow.

(b) If we require you to determine nonmethane hydrocarbon equivalent (NMHCE), use the following equation:

View Image

Where:

xNMHCE = the sum of the C1-equivalent concentrations of nonoxygenated nonmethane hydrocarbon (NONMHC), alcohols, and aldehydes.

RFCH4[THC-FID] = the response factor of THC-FID to CH4.

xCH4 = concentration of CH4, HC contamination (optional) and dry-to-wet corrected, as measured by the gas chromatograph FID.

(c) The following example shows how to determine NMHCE emissions based on ethanol (C2H5OH), methanol (CH3OH), acetaldehyde (C2H4O), and formaldehyde (CH2O) as C1-equivalent molar concentrations:

xTHC[THC-FID]cor = 145.6 [MICRO]mol/mol

xCH4 = 18.9 [MICRO]mol/mol

xC2H5OH = 100.8 [MICRO]mol/mol

xCH3OH = 1.1 [MICRO]mol/mol

xC2H4O = 19.1 [MICRO]mol/mol

xCH2O = 1.3 [MICRO]mol/mol

RFCH4[THC-FID] = 1.07

RFC2H5OH[THC-FID] = 0.76

RFCH3OH[THC-FID] = 0.74

RFH2H4O[THC-FID] = 0.50

RFCH2O[THC-FID] = 0.0

xNMHCE = xTHC[THC-FID]cor - (xC2H5OH·RFC2H5OH[THC-FID] + xCH3OH·RFCH3OH[THC-FID] + xC2H4O·RFC2H4O[THC-FID] + xCH2O·RFCH2O[THC-FID]) + xC2H5OH + xCH3OH + xC2H4O + xCH2O - (RFCH4[THC-FID]·xCH4)

xNMHCE = 145.6 - (100.8 · 0.76 + 1.1 · 0.74 + 19.1 · 0.50 + 1.3 · 0) + 100.8 + 1.1 + 19.1 + 1.3 - (1.07 · 18.9)

xNMHCE = 160.71 [MICRO]mol/mol

40 C.F.R. §1065.665

79 FR 23805 , Apr. 28, 2014, as amended at 81 FR 74187 , Oct. 25, 2016; 86 FR 34567 , June 29, 2021
81 FR 74187, 12/27/2016; 86 FR 34567, 6/29/2021