Section 1039.627 - What are the incentives for equipment manufacturers to use cleaner engines?This section allows equipment manufacturers to generate additional allowances under the provisions of § 1039.625 by producing equipment using engines at or above 19 kW certified to specified levels earlier than otherwise required.
(a) For early-compliant engines to generate offsets for use under this section, the following general provisions apply:(1) The engine manufacturer must comply with the provisions of § 1039.104(a)(1) for the offset-generating engines.(2) Engines you install in your equipment after December 31 of the years specified in § 1039.104(a)(1) do not generate allowances under this section, even if the engine manufacturer generated offsets for that engine under § 1039.104(a) .(3) Offset-generating engines must be certified to the following standards under this part 1039: | If the engine's maximum power is . . . | And you install . . . | Certified early to the . . . | You may reduce the number of engines in the same power category that are required to meet the . . . | In later model
years by . . . |
| (i) kW [GREATER THAN EQUAL TO]19 | One engine | Emissions standards in § 1039.101 | Standards in Tables 2 through 7 of § 1039.102 or in § 1039.101 | One engine. |
| (ii) 56 [LESS THAN EQUAL TO]kW [LESS THAN]130 | Two engines | NOX standards in § 1039.102(e)(1) , and NMHC standard of 0.19 g/kW-hr, a PM standard of 0.02 g/kW-hr, and a CO standard of 5.0 g/kW-hr | Standards in Tables 2 through 7 of § 1039.102 or in § 1039.101 | One engine. |
| (iii) 130 [LESS THAN EQUAL TO]kW [LESS THAN]560 | Two engines | NOX standards in § 1039.102(e)(2) , an NMHC standard of 0.19 g/kW-hr, a PM standard of 0.02 g/kW-hr, and a CO standard of 3.5 g/kW-hr | Standards in Tables 2 through 7 of § 1039.102 or in § 1039.101 | One engine. |
(b)Using engine offsets.(1) You may use engine offsets generated under paragraph (a) of this section to generate additional allowances under § 1039.625 , as follows: (i) For each engine offset, you may increase the number of available allowances under § 1039.625(b) for that power category by one engine for the years indicated.(ii) For engines in 56-560 kW power categories, you may transfer engine offsets across power categories within this power range. Calculate the number of additional allowances by scaling the number of generated engine offsets according to the ratio of engine power for offset and allowance engines. Make this calculation for all your offset engines for which you will transfer offsets under this paragraph (b)(1)(ii), then round the result to determine the total number of available power-weighted allowances. For example, if you generate engine offsets for 75 500-kW engines, you may generate up to 37,500 kW-engines of power-weighted allowances. You may apply this to 375 100-kW engines or any other combination that totals 37,500 kW-engines.(2) You may decline to use the offsets. If you decline, the engine manufacturer may use the provisions of § 1039.104(a)(1) .(c)Limitation on offsets for engines above 560 kW. For engines above 560 kW, you must track how many engines you install in generator sets and how many you install in other applications under the provisions of this section. Offsets from generator-set engines may be used only for generator-set engines. Offsets from engines for other applications may be used only for other applications besides generator sets.(d)Reporting. When you submit your first annual report under § 1039.625(g) , include the following additional information related to the engines you use to generate offsets under this section:(1) The name of each engine family involved.(2) The number of engines from each power category.(3) The maximum engine power of each engine.(4) For engines above 560 kW, whether you use engines certified to the standards for generator-set engines.(e)In-use fuel. If the engine manufacturer certifies using ultra low-sulfur diesel fuel, you must take steps to ensure that the in-use engines in the family will use diesel fuel with a sulfur concentration no greater than 15 ppm. For example, selling equipment only into applications where the operator commits to a central-fueling facility with ultra low-sulfur diesel fuel throughout its lifetime would meet this requirement. 69 FR 39213 , June 29, 2004, as amended at 75 FR 22992 , Apr. 30, 2010