Section 1036.136 - Clean Idle sticker(a) Design and produce stickers showing that your engines meet the federal Clean Idle standard if you certify engines to the Clean Idle NOX standard of § 1036.104(b) . The sticker must-(1) Meet the requirements of 40 CFR 1068.45 for permanent labels. The preferred location for sticker placement is on the driver's side of the hood.(2) Include one or both of your corporate name and trademark.(3) Identify that the engine is qualified to meet the federal Clean Idle NOX standard.(4) Include a serial number or other method to confirm that stickers have been properly applied to vehicles.(b) The following provisions apply for placing Clean Idle stickers on vehicles with installed engines that have been certified to the NOX standard of § 1036.104(b) : (1) If you install engines in vehicles you produce, you must apply a sticker to each vehicle certified to the Clean Idle standard.(2) If you ship engines for others to install in vehicles, include in your purchasing documentation the manufacturer's request for a specific number of labels corresponding to the number of engines ordered. Supply the vehicle manufacturer with exactly one sticker for each shipped engine certified to the Clean Idle standard. Prepare your emission-related installation instructions to ensure that vehicle manufacturers meet all application requirements. Keep the following records for at least five years:(i) Written documentation of the vehicle manufacturer's request for stickers.(ii) Tracking information for stickers you send and the date you sent them.(c) The provisions in 40 CFR 1068.101 apply for the Clean Idle sticker in the same way that those provisions apply for emission control information labels.