40 C.F.R. § 1036 app B of Part 1036
(a) This appendix specifies transient test intervals and duty cycles for the engine and powertrain testing described in §§ 1036.512 and 1036.514 , as follows:
(1) The transient test intervals and duty cycle for testing engines involves a schedule of normalized engine speed and torque values.
(2) The transient test intervals and duty cycles for powertrain testing involves a schedule of vehicle speeds and road grade. Determine road grade at each point based on the peak rated power of the powertrain system, Prated, determined in § 1036.520 and road grade coefficients using the following equation: Road grade = a ·P2rated + b·Prated + c
(3) The operating schedules in this appendix in some cases eliminate repetitive information by omitting 1 Hz records where there is no change in values. Perform testing by continuing to operate at the last specified values until the operating schedule shows a change in values. The official operating schedule for testing, cycle validation, and other purposes includes both the specified and omitted values.
(b) The following transient test interval applies for spark-ignition engines and powertrains when testing over the duty cycle specified in § 1036.512 :
Table 1 of Appendix B-Transient Test Interval for Spark-Ignition Engines and Powertrains Under § 1036.512
(c) The following transient test interval applies for compression-ignition engines and powertrains when testing over the duty cycle specified in § 1036.512 :
Table 2 of Appendix B-Transient Test Interval for Compression-Ignition Engines and Powertrains Under § 1036.512
(d) The following transient duty cycle applies for compression-ignition engines and powertrains when testing under § 1036.514 :
Table 3 of Appendix B-Transient Duty Cycle for Compression-Ignition Engines and Powertrains Under § 1036.514
40 C.F.R. 1036 app B of Part 1036