Section 721.11588 - Mixed metal oxide (generic)(a)Chemical substance and significant new uses subject to reporting.(1) The chemical substance generically identified as mixed metal oxide (PMN P-18-327) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been completely entrained.(2) The significant new uses are:(i)Protection in the workplace. Requirements as specified in § 721.63(a)(1), (a)(3) through (6), and (c) . When determining which persons are reasonably likely to be exposed as required for § 721.63(a)(1) and (a)(4) , engineering control measures (e.g., enclosure or confinement of the operation, general and local ventilation) or administrative control measures (e.g., workplace policies and procedures) shall be considered and implemented to prevent exposure, where feasible. For purposes of § 721.63(a)(5) , respirators must provide a National Institute for Occupational Safety and Health (NIOSH) assigned protection factor (APF) of at least 1,000. For purposes of § 721.63(a)(6) , the airborne form(s) of the substance include particulate (including solids or liquid droplets). (A) As an alternative to the respirator requirements in paragraph (a)(2)(i) of this section, a manufacturer or processor may choose to follow the new chemical exposure limit (NCEL) provision listed in the TSCA section 5(e) consent order for this substance. The NCEL is 0.1 mg/m3 as an 8-hour time-weighted average. Persons who wish to pursue NCELs as an alternative to § 721.63 respirator requirements may request to do so under § 721.30 . Persons whose § 721.30 requests to use NCELs approach are approved by EPA will be required to follow NCELs provisions comparable to those contained in the corresponding TSCA section 5(e) consent order.(ii)Hazard communication. Requirements as specified in § 721.72(a) through (d), (f), (g)(1), (g)(2), and (g)(5) . For purposes of § 721.72(g)(1) , this substance may cause: cancer; skin sensitization; respiratory sensitization; specific target organ toxicity. Alternative hazard and warning statements that meet the criteria of the Globally Harmonized System and OSHA Hazard Communication Standard may be used. For purposes of § 721.72(g)(2) , when using this substance: avoid skin contact, avoid breathing substance, avoid ingestion, use respiratory protection or maintain workplace airborne concentrations at or below an 8-hour time-weighted average of 0.1 mg/m3, and use skin protection.(b)Specific requirements. The provisions of subpart A of this part apply to this section except as modified by this paragraph (b). (1)Recordkeeping. Recordkeeping requirements as specified in § 721.125(a) through (h) are applicable to manufacturers and processors of this substance.(2)Limitation or revocation of certain modification requirements. The provisions of § 721.185 apply to this section.87 FR 73946, Dec. 2, 2022