Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below:
Subpart B
Core
Pollutant or pollutant property | NSPS | |
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | ||
Chromium | 0.048 | 0.020 |
Cyanide | 0.026 | 0.011 |
Zinc | 0.133 | 0.055 |
Aluminum | 0.80 | 0.35 |
Oil and grease | 1.30 | 1.30 |
Suspended solids | 1.95 | 1.56 |
pH | (1) | (1) |
1 Within the range of 7.0 to 10.0 at all times.
Subpart B
Direct Chill Casting Contact Cooling Water
Pollutant or pollutant property | NSPS | |
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cast by semicontinuous methods | ||
Chromium | 0.49 | 0.20 |
Cyanide | 0.27 | 0.11 |
Zinc | 1.36 | 0.56 |
Aluminum | 8.12 | 3.60 |
Oil and grease | 13.29 | 13.29 |
Suspended solids | 19.94 | 15.95 |
pH | (1) | (1) |
1 The pH shall be maintained within the range of 7.0 to 10.0 at all times except for those situations when this waste stream is discharged separately and without commingling with any other wastewater in which case the pH shall be within the range of 6.0 to 10.0 at all times.
Subpart B
Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property | NSPS | |
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum quenched | ||
Chromium | 0.76 | 0.31 |
Cyanide | 0.41 | 0.17 |
Zinc | 2.08 | 0.86 |
Aluminum | 12.45 | 5.52 |
Oil and grease | 20.37 | 20.37 |
Suspended solids | 30.56 | 24.45 |
pH | (1) | (1) |
1 Within the range of 7.0 to 10.0 at all times.
Subpart B
Cleaning or Etching Bath
Pollutant or pollutant property | NSPS | |
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.067 | 0.027 |
Cyanide | 0.036 | 0.015 |
Zinc | 0.183 | 0.075 |
Aluminum | 1.094 | 0.485 |
Oil and grease | 1.79 | 1.79 |
Suspended solids | 2.69 | 2.15 |
pH | (1) | (1) |
1 Within the range of 7.0 to 10.0 at all times.
Subpart B
Cleaning or Etching Rinse
Pollutant or pollutant property | NSPS | |
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.52 | 0.21 |
Cyanide | 0.28 | 0.11 |
Zinc | 1.42 | 0.59 |
Aluminum | 8.50 | 3.77 |
Oil and grease | 13.91 | 13.91 |
Suspended solids | 20.87 | 16.70 |
pH | (1) | (1) |
1 Within the range of 7.0 to 10.0 at all times.
Subpart B
Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property | NSPS | |
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.72 | 0.29 |
Cyanide | 0.39 | 0.16 |
Zinc | 1.97 | 0.81 |
Aluminum | 11.81 | 5.24 |
Oil and grease | 19.33 | 19.33 |
Suspended solids | 29.00 | 23.20 |
pH | (1) | (1) |
1 Within the range of 7.0 to 10.0 at all times.
40 C.F.R. §467.24