Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter N - EFFLUENT GUIDELINES AND STANDARDSPart 463 - PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY
Subpart C - FINISHING WATER SUBCATEGORY
Section 463.34 - New source performance standards

40 C.F.R. § 463.34

Download
PDF
Current through September 30, 2024
Section 463.34 - New source performance standards
(a) NSPS for bis(2-ethylhexyl) phthalate, di-n-butyl phthalate, and dimethyl phthalate are reserved.
(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the finishing water processes at a new source times the following pollutant concentrations:

Subpart C

[Finishing water]

Concentration used to calculate NSPS
Pollutant or pollutant property Maximum for any 1 day (mg/l) Maximum for monthly average (mg/l)
TSS13037
pH(1)(1)

1 Within the range of 6.0 to 9.0 at all times.

The permit authority will obtain the average process water usage flow rate for the new source finishing water processes from the permittee.

40 C.F.R. §463.34