40 C.F.R. § 428.86
Current through September 30, 2024
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 . In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
| Pollutant or pollutant property | Pretreatment standards | |
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed- | |
| Metric units (kg/kkg of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | (1) | (1) |
| TSS | (2) | (2) |
| pH | (2) | (2) |
| English units (lb/1,000 lb of product) | ||
| COD | 14.7 | 6.11 |
| Oil and grease | (1) | (1) |
| TSS | (2) | (2) |
| pH | (2) | (2) |
1 100 mg/l.
2 No limitation.
40 C.F.R. §428.86