Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter N - EFFLUENT GUIDELINES AND STANDARDSPart 428 - RUBBER MANUFACTURING POINT SOURCE CATEGORY
Subpart D - LATEX RUBBER SUBCATEGORY
Section 428.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable

40 C.F.R. § 428.43

Download
PDF
Current through September 30, 2024
Section 428.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable

The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed-
Metric units (kg/kkg of product)
COD2.661.78
BOD50.11.07
TSS0.21.14
Oil and grease0.11.07
pH(1)(1)
English units (lb/1,000 lb of product)
COD2.661.78
BOD50.11.07
TSS0.21.14
Oil and grease0.11.07
pH(1)(1)

1 Within the range 6.0 to 9.0.

40 C.F.R. § 428.43