Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter N - EFFLUENT GUIDELINES AND STANDARDSPart 428 - RUBBER MANUFACTURING POINT SOURCE CATEGORY
Subpart B - EMULSION CRUMB RUBBER SUBCATEGORY
Section 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available

40 C.F.R. § 428.22

Download
PDF
Current through September 30, 2024
Section 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available

Except as provided in §§ 125.30 through 125.32 , any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):

Effluent characteristicEffluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed-
Metric units (kg/kkg of product)
COD12.008.00
BOD50.60.40
TSS0.98.65
Oil and grease0.24.16
pH(1)(1)
English units (lb/1,000 lb of product)
COD12.008.00
BOD50.60.40
TSS0.98.65
Oil and grease0.24.16
pH(1)(1)

1 Within the range 6.0 to 9.0.

40 C.F.R. §428.22

39 FR 6662, Feb. 21, 1974, as amended at 60 FR 33963, June 29, 1995