40 C.F.R. § 426.115

Current through September 30, 2024
Section 426.115 - Standards of performance for new sources

The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart (the fluoride and lead limitations are applicable to the abrasive polishing and acid polishing waste water streams while the TSS, oil, and pH limitations are applicable to the entire process waste water stream):

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed-
Metric units (g/kkg of furnace pull)
Oil260.0130.0
TSS260.0130.0
Fluoride120.060.0
Lead30.90.45
pH(1)(1)
English units (lb/1,000 lb of furnace pull)
Oil0.260.13
TSS0.260.13
Fluoride0.120.06
Lead0.00090.00045
pH(1)(1)

1 Within the range 6.0 to 9.0.

40 C.F.R. § 426.115