Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter C - AIR PROGRAMSPart 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
Subpart XXXX - NATIONAL EMISSIONS STANDARDS FOR HAZARDOUS AIR POLLUTANTS: RUBBER TIRE MANUFACTURING
Appendix Table 8 to Subpart XXXX of Part 63 - Initial Compliance With the Emission

40 C.F.R. § 63.1662-63 app Table 8 to Subpart XXXX of Part 63

Download
PDF
Current through September 30, 2024
Appendix Table 8 to Subpart XXXX of Part 63 - Initial Compliance With the Emission

As stated in § 63.6002 , you must show initial compliance with the emission limits for puncture sealant application affected sources according to the following table:

For . . .For the following emission limit . . .You have demonstrated initial compliance if . . .
1. Sources complying with the overall control efficiency alternative in § 63.5989(a) The percent reduction option in Table 3 to this subpart, option 1You demonstrate that you conducted the performance tests, determined the overall efficiency of your control system, demonstrated that the applicable limits in Table 3 to this subpart, option 1, have been achieved, and established the operating limits in Table 4 of this subpart for your equipment according to the applicable procedures in § 63.6000(b) .
2. Sources complying with the permanent total enclosure and control device efficiency alternative in § 63.5989(b) The percent reduction option in Table 3 to this subpart, option 1You demonstrate that you conducted the performance tests, determined the individual efficiencies of your capture and control systems, demonstrated that the applicable limits in Table 3 to this subpart, option 1, have been achieved, and established the operating limits in Table 4 of this subpart for your equipment according to the applicable procedures in § 63.6000(b) .
3. Sources complying with the monthly average alternative in § 63.5989(c) without using an add-on control deviceThe HAP constituent option in Table 3 to this subpart, option 2You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 3 to this subpart, option 2, determined according to the applicable procedures in § 63.6000(c) and (d)(1) .
4. Sources complying with the HAP constituent alternative in § 63.5989(d) by using an add-on control deviceThe HAP constituent option in Table 3 to this subpart, option 2You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 3 to this subpart, option 2, determined according to the applicable procedures in § 63.6000(c), (d)(2) and (3), and (e) through (f) .

40 C.F.R. 63.1662-63 app Table 8 to Subpart XXXX of Part 63