Section 62.15160 - What emission limits must I meet?(a) After the date the initial stack test and continuous emission monitoring system evaluation are required or completed (whichever is earlier), you must meet the applicable emission limits specified in the four tables of this section: (1) For Class I units, see tables 2 and 3 of this subpart.(2) For Class II units, see table 4 of this subpart.(3) For carbon monoxide emission limits for both classes of units, see table 5 of this subpart.(b) If your Class I municipal waste combustion unit began construction, reconstruction, or modification after June 26, 1987, then you must comply with the dioxins/furans and mercury emission limits specified in table 2 of this subpart as applicable by the later of the following two dates:(1) One year after the effective date of this subpart.(2) One year after the issuance of a revised construction or operating permit, if a permit modification is required. Final compliance with the dioxins/furans limits must be achieved no later than November 6, 2005, even if the date one year after the issuance of a revised construction or operating permit is later than November 6, 2005.