Section 61.242-1 - Standards: General(a) Each owner or operator subject to the provisions of this subpart shall demonstrate compliance with the requirements of §§ 61.242-1 to 61.242-11 for each new and existing source as required in 40 CFR 61.05 , except as provided in §§ 61.243 and 61.244 .(b) Compliance with this subpart will be determined by review of records, review of performance test results, and inspection using the methods and procedures specified in § 61.245 .(c)(1) An owner or operator may request a determination of alternative means of emission limitation to the requirements of §§ 61.242-2 , 61.242-3 , 61.242-5 , 61.242-6 , 61.242-7 , 61.242-8 , 61.242-9 and 61.242-11 as provided in § 61.244 .(2) If the Administrator makes a determination that a means of emission limitation is at least a permissible alternative to the requirements of § 61.242-2 , 61.242-3 , 61.242-5 , 61.242-6 , 61.242-7 , 61.242-8 , 61.242-9 or 61.242-11 , an owner or operator shall comply with the requirements of that determination.(d) Each piece of equipment to which this subpart applies shall be marked in such a manner that it can be distinquished readily from other pieces of equipment.(e) Equipment that is in vacuum service is excluded from the requirements of § 61.242-2 , to § 61.242-11 if it is identified as required in § 61.246(e)(5) .49 FR 23513, June 6, 1984; 49 FR 38946, Oct. 2, 1984