Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter C - AIR PROGRAMSPart 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES
Subpart BBBB - EMISSION GUIDELINES AND COMPLIANCE TIMES FOR SMALL MUNICIPAL WASTE COMBUSTION UNITS CONSTRUCTED ON OR BEFORE AUGUST 30, 1999
Appendix Table 3 to Subpart BBBB of Part 60 - Model Rule-Class I Nitrogen Oxides Emission Limits for Existing Small Municipal Waste Combustion Units [a b c]

40 C.F.R. § 60 app Table 3 to Subpart BBBB of Part 60

Download
PDF
Current through October 31, 2024
Appendix Table 3 to Subpart BBBB of Part 60 - Model Rule-Class I Nitrogen Oxides Emission Limits for Existing Small Municipal Waste Combustion Units [a b c]

Municipal waste combustion technologyLimits for class I municipal waste combustion units
1. Mass burn waterwall200 parts per million by dry volume.
2. Mass burn rotary waterwall170 parts per million by dry volume.
3. Refuse-derived fuel250 parts per million by dry volume.
4. Fluidized bed220 parts per million by dry volume.
5. Mass burn refractory350 parts per million by dry volume.
6. Modular excess air190 parts per million by dry volume.
7. Modular starved air380 parts per million by dry volume.

a Class I units mean small municipal waste combustion units subject to this subpart that are located at municipal waste combustion plants with an aggregate plant combustion capacity greater than 250 tons per day of municipal solid waste. See § 60.1940 for definitions.

b Nitrogen oxides limits are measured at 7 percent oxygen.

c All limits are 24-hour daily block arithmetic average concentration. Compliance is determined for Class I units by continuous emission monitoring systems.

40 C.F.R. 60 app Table 3 to Subpart BBBB of Part 60