Section 401.48 - Turning basinsNo vessel shall be turned about in any canal, except:
(a) With permission from the traffic controller; and(b) At the locations set out in the table to this section. Table
1. South Shore Canal:(a) Turning Basin No. 1-Opposite Brossard.(b) Turning Basin No. 2-Between Lock 7 and the Guard Gate Cut for vessels up to 180 m in overall length.2. Welland Canal: (a) Turning Basin No. 1-Opposite St. Catharines Wharf for vessels up to 107 m in overall length.(b) Turning Basin No. 2-Between Lock 7 and the Guard Gate Cut for vessels up to 180 m in overall length.(c) Turning Basin No. 3-Immediately south of Port Robinson (Mile 13).(d) Turning Basin No. 4-North of Lock No. 8 for vessels up to 170 m in overall length.(e) For vessels up to 80 m in overall length.(1) North end of Wharf No. 1,(2) Tie-up wall above Lock 1,(3) Tie-up wall below Lock 2,(5) Between the southerly extremities of Wharves 18-2 and 18-3.39 FR 10900, Mar. 22, 1974, as amended at 47 FR 51123, Nov. 12, 1982; 48 FR 20691, May 9, 1983; 49 FR 30936, Aug. 2, 1984; 73 FR 9954 , Feb. 25, 2008 68 Stat. 93-96, 33 U.S.C. 981-990 , as amended and secs. 4 , 5 , 6 , 7 , 8 , 12 and 13 of sec. 2 of Pub. L. 95-474 , 92 Stat. 1471