Section 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats(a) The maximum weight capacity (W) marked on a boat that has one or more inboard or inboard-outdrive units for propulsion must not exceed the greater value of W obtained from either of the following formulas: View Image
(b) For the purposes of paragraph (a) of this section:(1) "Maximum displacement" is the weight of the volume of water displaced by the boat at its maximum level immersion in calm water without water coming aboard. For the purpose of this paragraph, a boat is level when it is transversely level and when either of the two following conditions are met: (i) The forward point where the sheer intersects the vertical centerline plane and the aft point where the sheer intersects the upper boundary of the transom (stern) are equidistant above the water surface or are equidistant below the water surface.(ii) The most forward point of the boat is level with or above the lowest point of water ingress.(2) "Boat weight" is the combination of: (ii) Deck and superstructure weight;(iii) Weight of permanent appurtenances; and(iv) Weight of full permanent fuel tanks.(3) "Machinery weight" is the combined weight of installed engines or motors, control equipment, drive units, and batteries.CGD 72-61R, 37 FR 15782, Aug. 4, 1972 For FEDERAL REGISTER citations affecting § 183.33 , see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov .