Section 154.106 - Incorporation by reference(a) Certain material is incorporated by reference (IBR) into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . To enforce any edition other than that specified in this section, the Coast Guard must publish a notice of change in the FEDERAL REGISTER and the material must be available to the public. All approved material is available for inspection at the Coast Guard Headquarters. Contact Commandant (CG-ENG), Attn: Office of Design and Engineering Standards, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593-7509, telephone 202-372-1418. You may also contact the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Also, it is available from the sources indicated in this section.(b) American National Standards Institute (ANSI), 25 West 43rd Street, 4th floor, New York, NY 10036. (1) ANSI B16.5, Steel Pipe Flanges and Flanged Fittings, 1988, IBR approved for §§ 154.500(d) , 154.2100(b) , 154.2101(d) , 154.2202(d) , and Appendix A, 7.3 to part 154.(2) ANSI B16.24, Bronze Pipe Flanges and Flange Fittings Class 150 and 300, 1979, IBR approved for §§ 154.500(d) and 154.2100(b) .(3) ANSI B31.3, Chemical Plant and Petroleum Refinery Piping, 1987 (including B31.3a-1988, B31.3b-1988, and B31.3c-1989 addenda), IBR approved for §§ 154.510(a) and 154.2100(b) .(c) American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005.(1) API Standard 2000, Venting Atmospheric and Low-Pressure Storage Tanks (Non-refrigerated and Refrigerated), Third Edition, January 1982 (reaffirmed December 1987)("API 2000"), IBR approved for §§ 154.2103(j) and 154.2203(e), (k), and (l) .(2) API Recommended Practice 550, Manual on Installation of Refinery Instruments and Control Systems, Part II-Process Stream Analyzers, Section 1-Oxygen Analyzers, Fourth Edition, February 1985 ("API 550"), IBR approved for § 154.2107(f) .(d) American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, NY 10016. (1) ASME B16.34 - 2004, Valves-Flanged, Threaded, and Welding End, issued September 2, 2005, IBR approved for § 154.2100(b) .(e) ASTM International (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (1) ASTM F631-93, Standard Guide for Collecting Skimmer Performance Data in Controlled Environments ("ASTM F631"), IBR approved for Appendix C, 6.3 to part 154.(2) ASTM F715-95, Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage ("ASTM F715"), IBR approved for Appendix C, 2.3.1 to part 154.(3) ASTM F722-82 (Reapproved 2008), Standard Specification for Welded Joints for Shipboard Piping Systems ("ASTM F722"), approved November 1, 2008, IBR approved for Appendix A, 8.4, 8.6 to part 154.(4) ASTM F1122-87 (Reapproved 1992), Standard Specification for Quick Disconnect Couplings ("ASTM F1122"), IBR approved for § 154.500(d) .(5) ASTM F1155-98, Standard Practice for Selection and Application of Piping System Materials ("ASTM F1155"), IBR approved for Appendix A, 7.1, 8.4 to part 154.(6) ASTM F1273-91 (Reapproved 2007) Standard Specification for Tank Vent Flame Arresters ("ASTM F1273"), approved December 1, 2007, IBR approved for §§ 154.2001 and 154.2105(j) .(f) International Electrotechnical Commission (IEC), Bureau Central de la Commission Electrotechnique Internationale, 3, rue de Varembe, P.O. Box 131, CH-1211 Geneva 20, Switzerland.(1) IEC 60309-1 Plugs, Socket-Outlets and Couplers for Industrial Purposes-Part 1: General Requirements, Edition 4.2 2012-06, IBR approved for § 154.2102(b) .(2) IEC 60309-2 Plugs, Socket-Outlets and Couplers for Industrial Purposes-Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05, IBR approved for § 154.2102(b) .(g) National Electrical Manufacturers Association (NEMA), 1300 North 17th Street, Suite 1752, Rosslyn, VA 22209. (1) ANSI NEMA WD-6-Wiring Devices, Dimensional Requirements, 1988 ("NEMA WD-6"), IBR approved for § 154.2102(a) .(h) National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169-7471. (1) NFPA 51B, Standard for Fire Prevention in Use of Cutting and Welding Processes, 1994, IBR approved for § 154.735(l) .(2) NFPA 70, National Electrical Code, 1987 ("NFPA 70 (1987)"), IBR approved for § 154.735(q) .(3) NFPA 70, National Electrical Code, 2011 ("NFPA 70 (2011)"), IBR approved for §§ 154.2100(c) and 154.2102(a) .(i) Oil Companies International Marine Forum (OCIMF), 29 Queen Anne's Gate, London, SW1H 9BU, England. (1) International Safety Guide for Oil Tankers and Terminals, Fifth Ed., 2006 ("ISGOTT"), IBR approved for §§ 154.735(s) , 154.2101(g) , and 154.2203(m) .(j) Underwriters Laboratories, Inc. (UL), 333 Pfingsten Road, Northbrook, IL 60062.(1) UL 525 Standard for Flame Arresters, 8th Edition, May 9, 2008, IBR approved for §§ 154.2001 and 154.2105(j) .USCG-1999-5150, 78 FR 42616, July 16, 2013, as amended by USCG-2014-0410, 79 FR 38436, July 7, 2014