32 C.F.R. § 170.14

Current through November 30, 2024

Section 170.14 - [Effective 12/16/2024] CMMC Model

(a)Overview. The CMMC Model incorporates the security requirements from:

(1)48 CFR 52.204-21 , Basic Safeguarding of Covered Contractor Information Systems;

(2) NIST SP 800-171 R2, Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations (incorporated by reference, see § 170.2); and

(3) Selected security requirements from NIST SP 800-172 Feb2021, Enhanced Security Requirements for Protecting Controlled Unclassified Information: A Supplement to NIST Special Publication 800-171 (incorporated by reference, see § 170.2).

(b)CMMC domains. The CMMC Model consists of domains that map to the Security Requirement Families defined in NIST SP 800-171 R2 (incorporated by reference, see § 170.2).

(c)CMMC level requirements. CMMC Levels 1-3 utilize the safeguarding requirements and security requirements specified in 48 CFR 52.204-21 (for Level 1), NIST SP 800-171 R2 (incorporated by reference, see § 170.2) (for Level 2), and selected security requirements from NIST SP 800-172 Feb2021 (incorporated by reference, see § 170.2) (for Level 3). This paragraph discusses the numbering scheme and the security requirements for each level.

(1)Numbering. Each security requirement has an identification number in the format-DD.L#-REQ-where:

(i) DD is the two-letter domain abbreviation;

(ii) L# is the CMMC level number; and

(iii) REQ is the 48 CFR 52.204-21 paragraph number, NIST SP 800-171 R2 requirement number, or NIST SP 800-172 Feb2021 requirement number.

(2)CMMC Level 1 security requirements. The security requirements in CMMC Level 1 are those set forth in 48 CFR 52.204-21(b)(1)(i) through (xv) .

(3)CMMC Level 2 security requirements. The security requirements in CMMC Level 2 are identical to the requirements in NIST SP 800-171 R2.

(4)CMMC Level 3 security requirements. The security requirements in CMMC Level 3 are selected from NIST SP 800-172 Feb2021, and where applicable, Organization-Defined Parameters (ODPs) are assigned. Table 1 to this paragraph identifies the selected requirements and applicable ODPs that represent the CMMC Level 3 security requirements. ODPs for the NIST SP 800-172 Feb2021 requirements are italicized, where applicable:

Table 1 to § 170.14(c)(4)

Security requirement No.*	CMMC Level 3 security requirements (selected NIST SP 800-172 Feb2021 security requirement with DoD ODPs italicized)
(i) AC.L3-3.1.2e	Restrict access to systems and system components to only those information resources that are owned, provisioned, or issued by the organization.
(ii) AC.L3-3.1.3e	Employ secure information transfer solutions to control information flows between security domains on connected systems.
(iii) AT.L3-3.2.1e	Provide awareness training upon initial hire, following a significant cyber event, and at least annually, focused on recognizing and responding to threats from social engineering, advanced persistent threat actors, breaches, and suspicious behaviors; update the training at least annually or when there are significant changes to the threat.
(iv) AT.L3-3.2.2e	Include practical exercises in awareness training for all users, tailored by roles, to include general users, users with specialized roles, and privileged users, that are aligned with current threat scenarios and provide feedback to individuals involved in the training and their supervisors.
(v) CM.L3-3.4.1e	Establish and maintain an authoritative source and repository to provide a trusted source and accountability for approved and implemented system components.
(vi) CM.L3-3.4.2e	Employ automated mechanisms to detect misconfigured or unauthorized system components; after detection, remove the components or place the components in a quarantine or remediation network to facilitate patching, re-configuration, or other mitigations.
(vii) CM.L3-3.4.3e	Employ automated discovery and management tools to maintain an up-to-date, complete, accurate, and readily available inventory of system components.
(viii) IA.L3-3.5.1e	Identify and authenticate systems and system components, where possible, before establishing a network connection using bidirectional authentication that is cryptographically based and replay resistant.
(ix) IA.L3-3.5.3e	Employ automated or manual/procedural mechanisms to prohibit system components from connecting to organizational systems unless the components are known, authenticated, in a properly configured state, or in a trust profile.
(x) IR.L3-3.6.1e	Establish and maintain a security operations center capability that operates 24/7, with allowance for remote/on-call staff.
(xi) IR.L3-3.6.2e	Establish and maintain a cyber-incident response team that can be deployed by the organization within 24 hours.
(xii) PS.L3-3.9.2e	Ensure that organizational systems are protected if adverse information develops or is obtained about individuals with access to CUI.
(xiii) RA.L3-3.11.1e	Employ threat intelligence, at a minimum from open or commercial sources, and any DoD-provided sources, as part of a risk assessment to guide and inform the development of organizational systems, security architectures, selection of security solutions, monitoring, threat hunting, and response and recovery activities.
(xiv) RA.L3-3.11.2e	Conduct cyber threat hunting activities on an on-going aperiodic basis or when indications warrant, to search for indicators of compromise in organizational systems and detect, track, and disrupt threats that evade existing controls.
(xv) RA.L3-3.11.3e	Employ advanced automation and analytics capabilities in support of analysts to predict and identify risks to organizations, systems, and system components.
(xvi) RA.L3-3.11.4e	Document or reference in the system security plan the security solution selected, the rationale for the security solution, and the risk determination.
(xvii) RA.L3-3.11.5e	Assess the effectiveness of security solutions at least annually or upon receipt of relevant cyber threat information, or in response to a relevant cyber incident, to address anticipated risk to organizational systems and the organization based on current and accumulated threat intelligence.
(xviii) RA.L3-3.11.6e	Assess, respond to, and monitor supply chain risks associated with organizational systems and system components.
(xix) RA.L3-3.11.7e	Develop a plan for managing supply chain risks associated with organizational systems and system components; update the plan at least annually, and upon receipt of relevant cyber threat information, or in response to a relevant cyber incident.
(xx) CA.L3-3.12.1e	Conduct penetration testing at least annually or when significant security changes are made to the system, leveraging automated scanning tools and ad hoc tests using subject matter experts.
(xxi) SC.L3-3.13.4e	Employ physical isolation techniques or logical isolation techniques or both in organizational systems and system components.
(xxii) SI.L3-3.14.1e	Verify the integrity of security critical and essential software using root of trust mechanisms or cryptographic signatures.
(xxiii) SI.L3-3.14.3e	Ensure that specialized assets including IoT, IIoT, OT, GFE, Restricted Information Systems, and test equipment are included in the scope of the specified enhanced security requirements or are segregated in purpose-specific networks.
(xxiv) SI.L3-3.14.6e	Use threat indicator information and effective mitigations obtained from, at a minimum, open or commercial sources, and any DoD-provided sources, to guide and inform intrusion detection and threat hunting.

* Roman numerals in parentheses before the Security Requirement are for numbering purposes only. The numerals are not part of the naming convention for the requirement.

(d)Implementation. Assessment of security requirements is prescribed by NIST SP 800-171A Jun2018 (incorporated by reference, see § 170.2) and NIST SP 800-172A Mar2022 (incorporated by reference, see § 170.2). Descriptive text in these documents support OSA implementation of the security requirements and use the terms organization-defined and periodically. Except where referring to Organization-Defined Parameters (ODPs), organization-defined means as determined by the OSA. Periodically means occurring at regular intervals. As used in many requirements within CMMC, the interval length is organization-defined to provided contractor flexibility, with an interval length of no more than one year.

32 C.F.R. §170.14

89 FR 83214 , 12/16/2024