Section 250.1902 - What must I include in my SEMS program?You must have a properly documented SEMS program in place and make it available to BSEE upon request as required by § 250.1924(b) .
(a) Your SEMS program must meet the minimum criteria outlined in this subpart, including the following SEMS program elements:(1) General (see § 250.1909 )(2) Safety and Environmental Information (see § 250.1910 )(3) Hazards Analysis (see § 250.1911 )(4) Management of Change (see § 250.1912 )(5) Operating Procedures (see § 250.1913 )(6) Safe Work Practices (see § 250.1914 )(7) Training (see § 250.1915 )(8) Mechanical Integrity (Assurance of Quality and Mechanical Integrity of Critical Equipment) (see § 250.1916 )(9) Pre-startup Review (see § 250.1917 )(10) Emergency Response and Control (see § 250.1918 )(11) Investigation of Incidents (see § 250.1919 )(12) Auditing (Audit of Safety and Environmental Management Program Elements) (see§ 250.1920 )(13) Recordkeeping (Records and Documentation) and additional BSEE requirements (see§ 250.1928 )(14) Stop Work Authority (SWA) (see § 250.1930 )(15) Ultimate Work Authority (UWA) (see § 250.1931 )(16) Employee Participation Plan (EPP) (see § 250.1932 )(17) Reporting Unsafe Working Conditions (see § 250.1933 ).(b) You must include a job safety analysis (JSA) for OCS activities identified or discussed in your SEMS program (see § 250.1911 ).(c) Your SEMS program must meet or exceed the standards of safety and environmental protection of API RP 75 (as incorporated by reference in § 250.198 ). 76 FR 64462 , Oct. 18, 2011, as amended at 78 FR 20440 , Apr. 5, 2013