Section 213.130 - [Effective 12/18/2025] Packaging and labeling operationsThere shall be written procedures designed to assure that correct labels, labeling, and packaging materials are used for medical gases; such written procedures shall be followed. These procedures shall incorporate the following features:
(a) Prevention of mix-ups by physical or spatial separation from operations on other products.(b) Identification and handling of filled containers of medical gas that are set aside and held in unlabeled condition for future labeling operations to preclude mislabeling of individual containers, lots, or portions of lots. Identification need not be applied to each individual container but shall be sufficient to determine name, strength, quantity of contents, and lot or control number of each container.(c) Identification of the medical gas with a lot or control number that permits determination of the history of the manufacture and control of the batch. The lot or control number of the medical gas may be identified by use of a separate identification sticker or decal.(d) Examination of packaging and labeling materials for suitability and correctness before packaging operations, and documentation of such examination in the batch production record. Product labels, including 360° wraparound labels, can be reused provided they meet all applicable labeling requirements, all information on the label is legible, and the label is in good condition.(e) Inspection of the packaging and labeling facilities immediately before use to assure that all medical gases have been removed from previous operations. Inspection shall also be made to assure that packaging and labeling materials not suitable for subsequent operations have been removed. Results of inspection shall be documented in the batch production records.(f) Bulk or transport containers (as defined in § 201.161(c)(3) of this chapter) are exempt from this section provided they are identified with the name of the product contained therein and accompanied by documentation identifying the product as meeting applicable compendial standards.